3D Model Miniature WW2 Building Hexagon

Këndi publik i sqarimeve

• 
  Krijuesi i Konkursit

  • 5 vite më parë

  HAHA they just had second thoughts again, so false alarm, we're not sure which scale is going to work best, and #22 may be too large of a scale.

  • 5 vite më parë
• 
  Krijuesi i Konkursit

  • 5 vite më parë

  This was really tough, to be honest we are not even sure which one is going to work the best until we print them out and use them. The partners have selected Abraham's work ( #22 , 20, 25) but it was almost a toin coss between that and Abdelkader and Otavio, andrijana and Abhijeet and others. We're going to try out Abraham's first but we may very well need to buy some of these other ones from you guys directly. Thank you all very much for all of the work you put into this little contest. We have bookmarked your profiles for future work! We will have some more contests coming up for more ww2 buildings and units as well! Thanks again!

  • 5 vite më parë
• 
  Krijuesi i Konkursit

  • 5 vite më parë

  Jeez guys! You made this too hard to choose, so many great entries! :) I did not think we would have so many good submissions. I will show the team and male a choice later today. Unless someone got Caught out of time and needs an extension?

  • 5 vite më parë
• 

  AbhijeetRanjan

  • 5 vite më parë

  Plzz.. Wait till the end time of the contest..

  • 5 vite më parë
• 

  deltanine3d

  • 5 vite më parë

  Check my new entry #13 .

  • 5 vite më parë
• 
  Krijuesi i Konkursit

  • 5 vite më parë

  Some great decoration #10 like the detail work above the windows. Don't know if this screams World War 2 or not, and the overhangs will probably not work well the injection mold. But I love the pillars and extra decoration!

  • 5 vite më parë
• 
  Krijuesi i Konkursit

  • 5 vite më parë

  Maybe a multi-row / townhome style?

  • 5 vite më parë
• 
  Krijuesi i Konkursit

  • 5 vite më parë

  I know decorating these up is a tall order however, a. for the low contest reward and b. due to the project restrictions. Showing all these to my partners tonight!

  • 5 vite më parë
• 
  Krijuesi i Konkursit

  • 5 vite më parë

  Hi Alexander, checking this out more closely. It looks pretty good. I think it needs a different texture for the roof / roof shingles. Actually upon closer examination its quite good. The walls seem a little thick in ratio to the size (we are going for around 2mm) and the depth of the windows looks great, but possibly too deep for the injection molding process. Lastly I know this is hard to define, but there are quite a few good entries so now we are looking for something that is particularly world war 2 era, european, normandy, france looking.

  • 5 vite më parë
• 
  Krijuesi i Konkursit

  • 5 vite më parë

  Looking good, sorry for the lack of feedback, so busy today. replied #9 .

  • 5 vite më parë
• 

  modym

  • 5 vite më parë

  entry #9 please check

  • 5 vite më parë
• 

  disturbedlex

  • 5 vite më parë

  Hi, you rated it 3/5 could you please tell me what you like and don't like about it? highly appriciated :)

  • 5 vite më parë
• 

  deltanine3d

  • 5 vite më parë

  The width (flat to flat) is 63.5 mm. Height without roof 38,1 mm.
  I modeled this building as a factory. On the third floor there are production halls, that is why there are such large windows (for lighting).
  What could I improve?

  • 5 vite më parë
• 
  Krijuesi i Konkursit

  • 5 vite më parë

  BTW looking for windows and some doors on all sides. If possible it would be nice if the sides had some differences. Like a Barn door on one side etc... But not necessary

  • 5 vite më parë
• 

  deltanine3d

  • 5 vite më parë

  Look at my entrie #3 . How do you like the overall concept and proportions?

  • 5 vite më parë
  1. 
     Krijuesi i Konkursit

     • 5 vite më parë

     Pretty good Volo! Basic shape looks good. Out of curiosity what is the ratio between width and height? The giant windows to tiny doors seem too different of a scale but otherwise good.

     • 5 vite më parë
• 
  Krijuesi i Konkursit

  • 5 vite më parë

  Good question. Short answer: these will have to represent larger buildings of the era, factories, governement buildings, perhaps a really large inn or building complex. Its going onto ww2 maps that have 3" hexes (point to point). The scale is pretty abstracted however as the printed buildings on the board they will be replacing are much smaller: .75 inches long usually.

  • 5 vite më parë
  1. 
     Krijuesi i Konkursit

     • 5 vite më parë

     Great excited to see it!

     • 5 vite më parë
• 
  Krijuesi i Konkursit

  • 5 vite më parë

  The building should be unnaturally squat probably 1.75" high to its 3" width. The roof section should probably be 10mm or higher.

  • 5 vite më parë
• 

  afajeus

  • 5 vite më parë

  #guaranteed

  • 5 vite më parë
  1. 
     Krijuesi i Konkursit

     • 5 vite më parë

     Now Guaranteed :)

     • 5 vite më parë
• 

  A+ Design

  • 5 vite më parë

  #guaranteed

  • 5 vite më parë
  1. 
     Krijuesi i Konkursit

     • 5 vite më parë

     Guaranteed :)

     • 5 vite më parë
• 

  LimLim96

  • 5 vite më parë

  #guaranteed
  
  Hello, may i ask is this 3D Modeling or only Concept Art ?

  • 5 vite më parë
  1. 
     Krijuesi i Konkursit

     • 5 vite më parë

     3D model

     • 5 vite më parë
• 
  Krijuesi i Konkursit

  • 5 vite më parë

  Final export needs to be .stl and .stp. Walls are 2 -2.5 mm thick, the inside is hollow. Texture inset ranges from .75 to 1 mm thick. (so it shows up clearly).

  • 5 vite më parë
• 
  Krijuesi i Konkursit

  • 5 vite më parë

  Now GUARANTEED! :)

  • 5 vite më parë
• 
  Krijuesi i Konkursit

  • 5 vite më parë

  I have had a hard time coming up with exact measurements of scale because we are taking so many liberties with it. The second example above has okay window size on top for large factory windows. The door is too big for a regular door., unless it was converted into a large stable/factory door. i.e. this model is representing a generic large building. Not a cottage or single family home.

  • 5 vite më parë
• 
  Krijuesi i Konkursit

  • 5 vite më parë

  i.e. entries do not need to be colored just grey plastic is best to help show the final 3d printed / injected molded project :) thanks for the first entries. When we get an entry just a tad closer we will add GUARANTEED.

  • 5 vite më parë
• 
  Krijuesi i Konkursit

  • 5 vite më parë

  And I THINK a shorter building, its a game abstraction, the building model will not be as "high" as it should be in a real replica, because infantry unit tiles will be placed on top while playing the board game to show they are inside the building.... but i could be wrong. will be easier to see in just solid grey plastic texture.

  • 5 vite më parë
• 
  Krijuesi i Konkursit

  • 5 vite më parë

  Feedback on the first entry. We would like to see more windows all around, and some more doors, probably a little smaller (in scale terms this is a really large building.). And roof shingles on the top of the building (vs just the brick). Probably a slightly higher partial roof now that we see it. Otherwise , yes this is pretty much what we were looking for. A cobblestone outside texture may make it look more World War 2 / normandy style but just a thought.

  • 5 vite më parë
• 
  Krijuesi i Konkursit

  • 5 vite më parë

  Hi this will be for 3d printing and eventually for injection molding. (But the injection mold will come later and we can make adjustments for that later.)

  • 5 vite më parë
• 

  deltanine3d

  • 5 vite më parë

  Do you need a 3d model or just renders?

  • 5 vite më parë
• 
  Krijuesi i Konkursit

  • 5 vite më parë

  Sketches or rough drafts are good for entries!

  • 5 vite më parë
• 
  Krijuesi i Konkursit

  • 5 vite më parë

  Let us know if you have any questions. This will be the first of several buildings (contest will convert over to direct jobs). Will convert to guaranteed after a couple entries to make sure we are on the right track :)

  • 5 vite më parë

Shfaq më shumë komente