NASA Contest: Create an Electronics Box Design (EBD)

  • Statusi: Closed
  • Çmimi: $250
  • Propozimet e Marra: 31
  • Fituesi: aurelianzapxiu

Përmbledhja e konkursit

Create an Electronics Box Design - (EBD)

In this contest, we need your help in designing a lightweight electronics box to accommodate individual electronics board, connectors, and a mechanical mounting bolt pattern.

Challenge Rules:
The prize will be awarded for the lowest mass, technically feasible design, submitted before the submission deadline.
No physical prototype is required, but the design must be sufficiently detailed to allow experts to assess the feasibility of your design and the credibility of your mass estimate. Only complete submission packages that follow the attached Submission Guidelines will be evaluated (the Exit Survey Code must be included).

You may use any tool you choose to develop your design, but your submission must be in PDF format. If your design is selected as a winning design, upload of the design source files will be required in their native format will be required during the handover phase before the award of the prize.

Aftësi të rekomanduara

Punimet mё tё mira nga ky konkurs

Shiko mё shumё vepra

Këndi publik i sqarimeve

  • nasacoeci
    Krijuesi i Konkursit
    • 1 vit më parë

    Please join us in congratulating Aurelian Z. as the winner for this challenge. There were some really great designs and the evaluation was not easy. Thanks to all of the participants for all of your hard work on this challenge.

    • 1 vit më parë
  • nasacoeci
    Krijuesi i Konkursit
    • 1 vit më parë

    This contest is now closed. Thank you all for your submissions and all of the hard work. We will start evaluating the submissions this week and hopefully will select a winner in the next few weeks. Again, thank you for all of your hard work.

    • 1 vit më parë
  • ermockler
    ermockler
    • 1 vit më parë

    So the box needs to hold 1x Arduino Mega and 2x MC 5004 P RS/CO and then the 2 dsub connectors? That's 2 of the MC 5004 (the P RS/CO version)?

    • 1 vit më parë
    1. nasacoeci
      Krijuesi i Konkursit
      • 1 vit më parë

      Correct (sorry for the slow response).

      • 1 vit më parë
  • skeeterasuncion
    skeeterasuncion
    • 1 vit më parë

    Hello,
    This seems like a very simple exercise, it looks like I've come late to the party for some of the more interesting challenges. That said, I'd like to get a better feel for the environment where this box will be mounted as far as it could effect the design needs.

    What is the normal temperature in the area(s) of the space station where this box will be mounted? In case of any failure of the HVAC system, what extremes in temperature should the design anticipate? Is there typically humidity, dust or other particulates that could enter through cooling (or weight saving) openings that would be detrimental to the operation of the boards?

    Given the time frame that remains in this context, I will assume no need for cooling holes, but the possibility of using some for weight savings. Such features are easily added, modified or removed when your answers are provided. Thanks.

    • 1 vit më parë
    1. nasacoeci
      Krijuesi i Konkursit
      • 1 vit më parë

      Assume a normal atmosphere at STP (70 degrees Fahrenheit, one atmosphere). However, please refer to the document for specific requirements for this challenge, which may be built upon for a follow-up challenge.

      • 1 vit më parë
  • Yohanesujang
    Yohanesujang
    • 1 vit më parë

    Q: Where the board will get power? do you have shiled board?

    • 1 vit më parë
    1. nasacoeci
      Krijuesi i Konkursit
      • 1 vit më parë

      This challenge is solely focused on the mechanical aspects of this electronics control box. You do not need to design for grounding your electronics. The only design requirements are outlined in the document.

      • 1 vit më parë
    2. Yohanesujang
      Yohanesujang
      • 1 vit më parë

      got it

      • 1 vit më parë
  • NIL20
    NIL20
    • 1 vit më parë

    how to get exit survey code for project submission

    • 1 vit më parë
    1. nasacoeci
      Krijuesi i Konkursit
      • 1 vit më parë

      If you look in the attached file on the contest description tab “EBDProblemDescription_SubmissionGuidelines_rev2.pdf” you will see in section 2, subsection 4. Pasted below:


      2 Submission Guidelines

      4. Exit Survey: To complete your submission, please take the Exit Survey by going to this webpage:

      https://seasgwu.qualtrics.com/jfe/form/SV_2r9DaeSlh48uMcZ
      At the end of the survey you will receive a unique code. In your submission, include this text:
      Exit Survey for Freelancer complete with completion code: .

      • 1 vit më parë
  • nasacoeci
    Krijuesi i Konkursit
    • 1 vit më parë

    Happy Monday! We have extended the submission deadline for this contest by 1 week!

    • 1 vit më parë
  • achatterjee0205
    achatterjee0205
    • 1 vit më parë

    is the mounting plate 4mm thick. The hole dimension in the figure is given as 4 mm deep. Just wanted to confirm.

    • 1 vit më parë
    1. nasacoeci
      Krijuesi i Konkursit
      • 1 vit më parë

      No, that just defines the interface plate to which you must attach too and the depth of the holes that you may use.

      • 1 vit më parë
    2. achatterjee0205
      achatterjee0205
      • 1 vit më parë

      That's for letting me know that. I got confused a bit.

      • 1 vit më parë
  • nasacoeci
    Krijuesi i Konkursit
    • 1 vit më parë

    Just a reminder that due to the nature of this contest and the study that it supports, all submissions are screened for completeness only prior to the end of the contest. If the submission is complete, it is rated with 3 stars. Final review of all of the complete submissions to determine the best/selected submission will only occur after the contest closes. Best of luck.

    • 1 vit më parë
  • achatterjee0205
    achatterjee0205
    • 1 vit më parë

    A small question, will the Faulhaber controller have the connector pins in the final design? Since they are used generally for prototyping and the final connections will probably be soldered, can I not consider them while noting down the dimensions of the board?

    • 1 vit më parë
    1. nasacoeci
      Krijuesi i Konkursit
      • 1 vit më parë

      You can consider that the connector pins will be in the final design.

      • 1 vit më parë
    2. achatterjee0205
      achatterjee0205
      • 1 vit më parë

      Thank you for the reply.

      • 1 vit më parë
  • EdwinStoop88
    EdwinStoop88
    • 1 vit më parë

    Hello Contest holder the upload system keeps rejecting my pdf file. Should the PDF file consist of a single page ?

    • 1 vit më parë
    1. nasacoeci
      Krijuesi i Konkursit
      • 1 vit më parë

      Your submission PDF looks complete and is multiple pages, so I assume that this issue was resolved. It may have been a platform issue. Let us know if you have any other issues.

      • 1 vit më parë
  • nasacoeci
    Krijuesi i Konkursit
    • 1 vit më parë

    UPDATE: Please note that based on some feedback from you, we discovered some errors in the attached files. Those files have been updated on the contest description tab. Please download the updates and adjust your designs per the modified information. Sorry for any inconvenience. Thank you.

    • 1 vit më parë
  • aurelianzapxiu
    aurelianzapxiu
    • 1 vit më parë

    Hello. The 3 required boards with their standard headers and connectors cannot fit the box while fulfilling the 5mm/10mm distance requirements.

    • 1 vit më parë
    1. nasacoeci
      Krijuesi i Konkursit
      • 1 vit më parë

      We are issuing an update to the challenge. Thanks for the feedback!

      • 1 vit më parë
  • c0d3rPK
    c0d3rPK
    • 1 vit më parë

    Questions:

    1. Is the box supposed to be air-completely solid?
    2. Is the box to be sealed air-tight (including washers/gasket/o-ring etc as required?

    Thanks

    • 1 vit më parë
    1. c0d3rPK
      c0d3rPK
      • 1 vit më parë

      Apologies for the typo. I meant if the box required to be completely solid aluminum or can there be cavities etc for air flow for eg?

      • 1 vit më parë
    2. nasacoeci
      Krijuesi i Konkursit
      • 1 vit më parë

      Those design choices are up to you. Please refer to the requirements for required features

      • 1 vit më parë
  • gane32810
    gane32810
    • 1 vit më parë

    #increaseprize

    • 1 vit më parë
    1. nasacoeci
      Krijuesi i Konkursit
      • 1 vit më parë

      Please review the contest description carefully. This is not intended to be an overly complex design problem.

      • 1 vit më parë
    2. gane32810
      gane32810
      • 1 vit më parë

      Hi, thanks for your reply.. based on my understanding of the brief and stated requirements, the contest prize should be 3-4 times the current value... but I guess you have your set budget, all the best with finding a suitable entry..

      • 1 vit më parë
  • Jun01
    Jun01
    • 1 vit më parë

    Questions:

    1. When the Electronics Box (EB) is mounted, are the mounting holes dedicated to it; or should they be left ‘available’ to something else, like the Astrobee arm?

    2. If the mount holes are for the EB, what fastener is used to mount it, and are those fasteners applied from above (relative to pics provided)?

    3. Is there an existing, fixed interface for the EBs circuit board connectors/pins? If so/not, how and/or by what will they be engaged?

    Thanks.

    • 1 vit më parë
    1. nasacoeci
      Krijuesi i Konkursit
      • 1 vit më parë

      1) The mounting holes provided are dedicated for the EB.

      2) Please review the problem document for specifics on the fasteners and holes provided.

      3) There is a fixed interface for the Glenair Connector and its position from the Astrobee, but you are to design how your CDPD connects to the RA.

      • 1 vit më parë
  • 3DIEST
    3DIEST
    • 1 vit më parë

    #increase prize

    • 1 vit më parë
    1. nasacoeci
      Krijuesi i Konkursit
      • 1 vit më parë

      Please review the contest description carefully. This is not intended to be an overly complex design problem.

      • 1 vit më parë
  • 3DIEST
    3DIEST
    • 1 vit më parë

    how to make entry to this contest?

    • 1 vit më parë
    1. nasacoeci
      Krijuesi i Konkursit
      • 1 vit më parë

      Please refer to the submission guidelines attached to the contest description tab. Submissions should be made using PDF file format. For specifics on how to use the Freelancer.com platform, see the site help/support links.

      • 1 vit më parë
  • Dmitrij1169
    Dmitrij1169
    • 1 vit më parë

    to perform this task, I would like to understand what actuators will control this node (block diagram or schematic diagram)

    • 1 vit më parë
    1. nasacoeci
      Krijuesi i Konkursit
      • 1 vit më parë

      Can you clarify your question?

      • 1 vit më parë

Shfaq më shumë komente

Si të filloni me konkurset

  • Postoni konkursin tuaj

    Postoni Konkursin Tuaj Shpejtë dhe Thjeshtë

  • Merrni propozime me shumicë

    Merrni Propozime me Shumicë Nga e gjithë bota

  • Zgjidhni propozimin më të mirë

    Zgjidhni propozimin më të mirë Shkarkimi i dokumentave - Thjeshtë

Postoni një konkurs tani! ose Bashkohuni me ne Sot!