Find Jobs
Hire Freelancers

UPS and Solar Charge for Raspberry Pi

$30-250 USD

Mbyllur
Postuar over 5 years ago

$30-250 USD

Paguhet në dorëzim
I'm looking for a UPS circuit board design that can satisfy the following requirements for the Raspberry Pi 3. - Charge battery with 12V solar panel - Supply to 5V and up to 2.5A Power to Raspberry pi - Accepts charge from 20W solar panel I want to be able to monitor the following data == Example == batt_voltage: 13.23 pv_voltage: 0.14 load_amps: 0.01 batt_overdischarge_voltage: 11.07 batt_full_voltage: 14.45 load_on: True load_overload: False load_short: False batt_overload: False batt_overdischarge: False batt_full: False batt_charging: False batt_temp: 21 charge_current: 0.0 Project Deliverables: - Soft copy of Circuit Board Design - 10 physical sample Circuit Boards that we can test (You can choose any pcb printer/manufacture that you wish) - Python source code that will go along with it NOTE: Existing circuit board designs that meets the project requirements are acceptable and you are encouraged to provide these project references.
ID e Projektit: 17396351

Rreth projektit

12 propozime
Projekt në distancë
Aktive 6 yrs ago

Po kërkoni të fitoni para?

Përfitimet e ofertës për Freelancer

Vendosni buxhetin dhe afatin tuaj
Paguhuni për punën tuaj
Përshkruani propozimin tuaj
Është falas të regjistrohesh dhe të bësh oferta për punë
12 freelancers are bidding on average $354 USD for this job
Avatari i Përdoruesit
Hi, Thanks for the Email and Invitation. the bid Placed is just a place holder and ill tell you the final bid ones the project specs are final Relevant Skills and Experience As you know we already have a design for you that we can modify. our design has the fallowing specs can we discuss the project over chat ? Proposed Milestones $155 USD - Lets dicuss
$155 USD në 3 ditë
5,0 (41 përshtypje)
6,5
6,5
Avatari i Përdoruesit
It is necessary to first design a general schematic of necessary components, then a pcb board based on that using KICAD, then a prototype by ordering and building components. Relevant Skills and Experience I am experienced in electrical design through KICAD and currently study/work in Mechatronics Engineering in San Jose State University. I have worked in the AGV industry and Robotics electronics. Proposed Milestones $500 USD - Initial Design including wire diagram and general BOM $400 USD - Specific Detailed BOM and PCB design with output files for manufacturing $211 USD - Python programming, testing of sample boards, and more.
$1 111 USD në 14 ditë
4,9 (2 përshtypje)
3,6
3,6
Avatari i Përdoruesit
ok buddy,,,u can tell...i m here...i used to work on. Relevant Skills and Experience Raspberry pie arduino html php c# vb.net android proteus matlab Proposed Milestones $90 USD - u will feel brotherhood Note: i will send u the prototype in this budget
$90 USD në 3 ditë
4,7 (16 përshtypje)
3,4
3,4
Avatari i Përdoruesit
Hi, i am kahan. I am embedded developer and have much experienced hardware and software side. Relevant Skills and Experience embedded, electrical Proposed Milestones $222 USD - complete project Waiting for further discussion. Thank you
$222 USD në 7 ditë
5,0 (7 përshtypje)
3,4
3,4
Avatari i Përdoruesit
I can design the whole system from you since I've developed a skill set directly relevant to the PCB design role you are hiring for including prototype, research, development, and experimental design. Relevant Skills and Experience I have consistently demonstrated multitasking, technical, and research abilities in every aspect of my PCB designer career. Proposed Milestones $177 USD - project milestone
$177 USD në 4 ditë
0,0 (0 përshtypje)
0,0
0,0
Avatari i Përdoruesit
I am ready to start work on your algorithm jobs. I am creative and flexible and will be beneficial to your jobs. I strongly believe that my experience and skill in the areas of C and C# programming will be beneficial to your related jobs and projects. I also have great experience working as a C++ Programmer and as a CG designer. If hired I promise to complete my task quickly and be positive for your corporate needs.
$35 USD në 2 ditë
0,0 (0 përshtypje)
0,0
0,0
Avatari i Përdoruesit
Hi there, I'm interested in your project. I made similar solar charge controller including MPPT algorithm and 5V/3A smps to charge cellphones. I found that your project is similar to what I did before. Only one thing is different is I'm using mikroC in most of the case. If it is ok, I can help you.
$300 USD në 20 ditë
4,2 (1 review)
0,1
0,1

Rreth klientit

Flamuri i UNITED STATES
Rockville, United States
4,8
26
Mënyra e pagesës u verifikua
Anëtar që nga mar 8, 2005

Verifikimi i klientit

Faleminderit! Ne ju kemi dërguar me email një lidhje për të kërkuar kredinë tuaj falas.
Ndodhi një gabim gjatë dërgimit të email-it tuaj. Ju lutemi provoni përsëri.
Përdorues të regjistruar Punë të postuara
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Po ngarkohet shikimi paraprak
Leja u dha për Geolocation.
Seanca e hyrjes ka skaduar dhe ke dalë. Hyr sërish.