Find Jobs
Hire Freelancers

Arduino NANO project. Small Display is controlled by encoder. Display showes 12 different images according to encoder position. (todo: software and hardware-connecting)

€30-250 EUR

I përfunduar
Postuar almost 4 years ago

€30-250 EUR

Paguhet në dorëzim
TARGET: According to the position of the encoder the display has to show 12 different letterings. (see image in annex) USED HARDWARE: Encoder: [login to view URL] Aruino-NANO: [login to view URL] OLED 066: [login to view URL] Breadboard: [login to view URL] Jumpercable: [login to view URL] (see also images in annex) You provide a conneting schematic for all used parts (not intern - only for conneting e.g. Nano with encoder). You also provide clear images of the conneting. (Please make straight or rectangular wires) SOFTWARE: You provide the software to run the described functions. You also decribe me (with images) all necessary settings at the Arduino-Progamming tool and at the PC.
ID e Projektit: 26071617

Rreth projektit

23 propozime
Projekt në distancë
Aktive 4 yrs ago

Po kërkoni të fitoni para?

Përfitimet e ofertës për Freelancer

Vendosni buxhetin dhe afatin tuaj
Paguhuni për punën tuaj
Përshkruani propozimin tuaj
Është falas të regjistrohesh dhe të bësh oferta për punë
I dhënë për:
Avatari i Përdoruesit
Hi, I can do this for you, as we discussed on the chat. The arduino will not remember the last position of the encoder, if restarted. Thanks.
€30 EUR në 2 ditë
5,0 (21 përshtypje)
4,8
4,8
23 freelancers are bidding on average €121 EUR for this job
Avatari i Përdoruesit
Dear sir I have more than 10 years experience in embedded systems design using Arduino, please check my profile also please message me so that we can discuss
€133 EUR në 5 ditë
4,9 (293 përshtypje)
7,6
7,6
Avatari i Përdoruesit
Hello, thank you for your job posting. I read your description about--ARDUINO I am a senior electrical engineer. I have plenty of experience in firmware development and micro-controller developments. I can write the firmware based on Arduino, Raspberry Pi, Pic, Atmega, FPGA, ARM, DSP, PLC and so on. And I can design the circuit by the Altium, Eagle, KiCAD, Allegro & OrCAD, PADs. I provide the services - Gerber files, Netlist generation, BOM generation and 3D Models of PCAD and ECAD. I am also good at AutoCAD, Solidworks. And I can simulate all circuits with Proteus, LT-spice, Matlab, Simulink, Multisim, and Labview as well. Due to my experience in firmware development, I will bring you the perfect result in time with high quality. I will also give you a detailed explanation of the process. Looking forward to hearing from you soon Thanks
€50 EUR në 2 ditë
5,0 (142 përshtypje)
6,9
6,9
Avatari i Përdoruesit
Hello sir, I have experience in designing electronics circuits and can develop hardware compatible smartphone and PC based apps. I also have done a lot of IoT projects and can transform your idea into a fully working product. I HAVE ALL THE HARDWARE AVAILABLE TO TEST AND DEBUG THE CODES. If you wish we can discuss details in chat. Thanks
€200 EUR në 10 ditë
4,8 (70 përshtypje)
7,1
7,1
Avatari i Përdoruesit
Dear Client. I have just read your job description and your project is really interesting to me. I have many experiences working for 7+ years with Circuit design, PCB design, manufacturing functional prototyping with firmware programming and testing especially. Here are some of the experiences that I built ago. - Schematic and PCB design and Layout using Altium Designer, Eagle, KiCAD, OrCAD. - high-speed, flexible, Multi-Layer PCB design. - DDR, motor control, power converter, UART, SPI, I2C, RF, BLE design - ARM, DSP, MCUs, Arduino, Raspberry pi experiences. I am sure I can complete it on time with high quality. If you hire me, I can start to work for your job immediately. I'll do my best for you. Thank you for your time. Best regards.
€30 EUR në 5 ditë
4,9 (26 përshtypje)
5,7
5,7
Avatari i Përdoruesit
Hi. I'm an advanced electronic engineering student from Argentina. I've been working in freelancer.com for more than four years, and I've completed more than 20 projects, all with good recommendations, you can check my profile. You will get from me the best effort to deliver a project that is up to your expectations and receive a good rate from your part. I've worked with a similar project. Although it was using a keyboard to navigate menu, it shouldn't be a problem implementing encoder. Please, if you have any questions, feel free to ask me! Regards, Esteban.
€150 EUR në 10 ditë
4,8 (23 përshtypje)
4,7
4,7
Avatari i Përdoruesit
Dear Customer, please take a look at my portfolio. You will see that I can program the software according to your wishes. You will receive a coordinated package from me with all the information you need for the later use of the software: > Complete software project > Compiled and ready to use binary > Documentation Please join the chat to discuss the details of the project. Looking forward to working with you soon. Best wishes Daniel
€130 EUR në 7 ditë
5,0 (5 përshtypje)
4,1
4,1
Avatari i Përdoruesit
I was doing this kind of projects since 2005 so I am the expert you need to complete your project with a successfully results.
€240 EUR në 7 ditë
4,9 (4 përshtypje)
3,8
3,8
Avatari i Përdoruesit
Hello, I am an Electrical and Electronics Engineer and I completed my master's degree. I designed many electronic circuits and I have academic publications on this subject. As you can see from my portfolio, I have used Arduino before. I have worked with many types of sensors. I designed many circuits using Arduino and Atmega chip. I made a digital caliper circuit using encoder and it contains high sensitivity. I can help you. Thanks to the electronic circuit design programs I can use, I can design and test the circuit. I always guarantee free support if there is any problem when the project is over. We can proceed more easily by speaking. The programs I use regularly: >> Matlab / Simulink, Python, C #, Arduino, >> Altium Designer, Proteus, >> Multisim, LTSpice, LabVIEW, SIMPLIS, Tanner Tools, TINA-TI, >> SolidWorks, DesignSpark I work professionally. Thanks :)
€170 EUR në 3 ditë
4,7 (11 përshtypje)
3,6
3,6
Avatari i Përdoruesit
Hi, I am an electronics engineer with experience. I can code arduino and make tft display as per your requirement.
€30 EUR në 1 ditë
4,7 (7 përshtypje)
3,3
3,3
Avatari i Përdoruesit
Hello there! I'm Onur. Master of Arduino. I can easily do it with rich communication. I’m very experienced with arduinos (5+ years). I can help you with everything as if we are friends. I can make everything easy as possible for you. I'm sure you will be satisfied! Also, I’m a senior Mechatronics Engineer student and living on my own without any support. So any support will be appreciated. Please consider giving me a chance to work. Thanks
€50 EUR në 2 ditë
5,0 (10 përshtypje)
3,1
3,1
Avatari i Përdoruesit
Dear, client I can absolutely help you with Arduino, Rotary and OLED. Looking forward to hearing from you soon. Best regards.
€150 EUR në 2 ditë
5,0 (3 përshtypje)
2,9
2,9
Avatari i Përdoruesit
Hi, your project is quite funny. I have already all the components here, not exactly the same display but a very close one. What if I build it for free and if and when you like it you'll pay ? I think that you've nothing to loose, so if you like the approach let me know and I'll realize it. Cheers, Alex.
€99 EUR në 7 ditë
5,0 (4 përshtypje)
2,3
2,3
Avatari i Përdoruesit
Hello, I'm an electronic engineer and I able to complete your project. I tech entries and advanced courses about using IOT and also electronic instrumentation on local university. I am very passionate about my work I really enjoy that I do. I look forward to hearing from you. Regards, Alejandro
€250 EUR në 7 ditë
3,4 (2 përshtypje)
2,8
2,8
Avatari i Përdoruesit
I have good experience in Arduino programming and worked on this kind of project.I can develop a code for Ur requirement .Please ping me for more discussion.
€133 EUR në 10 ditë
5,0 (1 review)
1,0
1,0
Avatari i Përdoruesit
Hi I am Electrical and Electronics engineer I can do this task for you feel free to contact me.
€133 EUR në 7 ditë
5,0 (1 review)
1,0
1,0
Avatari i Përdoruesit
ELECTRICAL As an electronic architect, I have been working in PCB structure/design and firmware programming field for 8+ years. Here is a portion of the encounters that I worked back. - Schematic and PCB Format is utilizing Altium Planner, Rhythm, Falcon, etc. ISE/XPS/SDK/Vivado, Altera Quartus, IceCube) - ARM, DSP, MCUs, Arduino experience. - Arm centers: ATSAM, STM32, PIC32, A13, Freescale, MSP, NXP - MPU: Pic16F, Pic18F, Pic33F, Atmega8,16,128,32,8051,8951,8052,80251 - Single board PC: Raspberry Pi, Beaglebone, NanoPi - Strong with UART, I2C, SPI, BLE, BT, GSM/GPRS/GPS, xBee, ZigBee. - Especially full understanding for BLE HM10, HC05, ESP32, DA14580, nRF52832, 52840, BlueNRG, - C/C++ Coding IDE: keil uvision, Eclipse IDE, Arduino IDE, Avr Studio. - Microprocessor / Microcontrollers: 8051, 8086, ATMEGA, AVR, ATSAM3X8E,STM32,PIC Open Source Micro controllers Platforms: Arduino Uno, Arduino Nano, Arduino Due, STM32 Nucleo board. Experience in managing all phases of electronic product manufacturing and assembly Experience in board-level Testing, Debugging, Test Reports, Test Plans. I am ready to give hardworking, reliability, flexibility & honesty. I can work with minimal supervision, communicate & give updates on the status of my work output. When you employ me, anticipated that I should enable your business to like I 'm developing it as my own. I couldn't imagine anything better than to get notification from you
€30 EUR në 2 ditë
0,0 (0 përshtypje)
0,0
0,0
Avatari i Përdoruesit
Dear Madam or Sir, Let me assure you that my qualifications and my experience make me an ideal candidate for the required job. I guarantee duty completion according to the terms of the agreement. You will most probably be satisfied with the results of our cooperation Send me a message on the Freelancer Chat list for discussion about delivery time. Thanks William Cuervo
€60 EUR në 5 ditë
0,0 (0 përshtypje)
0,0
0,0
Avatari i Përdoruesit
I am a recent Computer Engineering graduate and have worked with micro controllers extensively in my undergrad course work. Especially with STM32 ARM cortex micro-controllers interfacing with LED display modules. I think I can do a good job in delivering the project satisfactorily.
€140 EUR në 7 ditë
0,0 (0 përshtypje)
0,0
0,0
Avatari i Përdoruesit
i will make it in 3 days, i'm a free man and i have a modest experience with arduino and similar projects
€140 EUR në 7 ditë
0,0 (0 përshtypje)
0,0
0,0

Rreth klientit

Flamuri i GERMANY
Fürth, Germany
5,0
26
Mënyra e pagesës u verifikua
Anëtar që nga korr 19, 2018

Verifikimi i klientit

Faleminderit! Ne ju kemi dërguar me email një lidhje për të kërkuar kredinë tuaj falas.
Ndodhi një gabim gjatë dërgimit të email-it tuaj. Ju lutemi provoni përsëri.
Përdorues të regjistruar Punë të postuara
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Po ngarkohet shikimi paraprak
Leja u dha për Geolocation.
Seanca e hyrjes ka skaduar dhe ke dalë. Hyr sërish.