Find Jobs
Hire Freelancers

Editing SolidWorks 2017 Files - must own SolidWorks 2017

$30-250 USD

Anuluar
Postuar almost 6 years ago

$30-250 USD

Paguhet në dorëzim
This is a specialty child seat that was created for a specific use case. The design for the unit (the frame) was being updated and a custom disposable cushion being developed. The updating was being done by a grad-student in SolidWorks 2017 who was supposed to work on the whole project, when he discovered he couldn't create the cushion. We found someone else to build the cushion when we discovered the grad student had also made a miscalculation in the seat frame design that was causing problems. The unit is designed to fold in half to save space, however when folded, the top half of the frame was designed to fold into the bottom half.. When open, both halves were “supposed to be equal” in height. Unfortunately, the grad student did not implement this correctly, the top half was bigger than the bottom, and attempts to fix this caused other elements of the frame (the collapsible clamps, etc.) to misalign. The miscalculation is problematic. We need to fix it without breaking the rest of the frame design. Additionally, the safety belt harness was supposed to be repositioned on the unit and was not. We need someone who can make both these changes quickly (IN LESS THAN 24 HOURS), provide us with SW 2017 assemblies and .jpgs, reflecting the changes in various configurations, provide us with a SW 2014 compatible version (for our cushion developer to test and ensure the new cushion fits properly) - and then integrate the unit with the new disposable cushion and provide final SW 2017 assemblies and .jpgs. Note: attached is one of the ORIGINAL designs - before modification MINIMUM Requirements: -You MUST have SolidWorks 2017 already loaded on YOUR OWN system - or please do not apply -You MUST be able to start working IMMEDIATELY or please do not apply -You MUST be experienced enough that you can do what is required within 24 hours or less or please do not apply -You MUST be able to demonstrate that you've worked on something similar in SolidWorks.
ID e Projektit: 16928691

Rreth projektit

24 propozime
Projekt në distancë
Aktive 6 yrs ago

Po kërkoni të fitoni para?

Përfitimet e ofertës për Freelancer

Vendosni buxhetin dhe afatin tuaj
Paguhuni për punën tuaj
Përshkruani propozimin tuaj
Është falas të regjistrohesh dhe të bësh oferta për punë
I dhënë për:
Avatari i Përdoruesit
HI there, I am a Mechanical Engineer, with Solidworks 2017 (with licence) installed and ready to go. I have over 9 years of experience in this field of building mechanical stuff in Solidworks. I haven't got the chance to show any of my work here, but you can find few examples here: [login to view URL] Let me know if you have any questions. Best regards, Ronen
$166 USD në 1 ditë
0,0 (0 përshtypje)
0,0
0,0
24 freelancers are bidding on average $158 USD for this job
Avatari i Përdoruesit
I am a solidworks expert. I have many experience in 3D modelling from image using solidworks. I can complete your projects with a high quality and within a short time.
$155 USD në 3 ditë
4,8 (112 përshtypje)
6,7
6,7
Avatari i Përdoruesit
I have Solidworks 2018. please share 3D file, And explain changes
$80 USD në 3 ditë
4,9 (80 përshtypje)
6,3
6,3
Avatari i Përdoruesit
I can make changes about which you are reporting in the 2017 version now in 3-5 hours. But I can not save the file to Solid 2014
$222 USD në 3 ditë
5,0 (17 përshtypje)
6,2
6,2
Avatari i Përdoruesit
i have solidwork 2017 anh i have more experience in solidwork. i can do it for you. pls, contact me to discuss detail for project
$150 USD në 2 ditë
4,8 (84 përshtypje)
6,4
6,4
Avatari i Përdoruesit
I am professional engineer with experience in designing and manufacturing over 7 years. I am interested in freelancer job in SolidWork. If you are interested , feel free to contact with me.
$222 USD në 3 ditë
5,0 (15 përshtypje)
4,5
4,5
Avatari i Përdoruesit
Dear Hiring manager, I am a Mechanical Engineer working in the designing field since more than 4.5 years. I have worked with many clients for designing, rendering, 3D printing projects. I looked into your request. I do the designing and modelling of the parts and products. I can do this project and will design the required seat as per the design parameters. I will deliver the designed files in specified format of SW 2017. I have Solidworks software on my own and will be available to start work as soon as the project is aloted to me. I have experience with 3D Modelling, Rendering and Product design. I have expertise with 3D Modelling in Solidworks 2017, CATIA V5R20, Fusion 360 and other Autodesk tools. I can also provide you 3D printed model and prototypes of the product if you require. Please have a look at my portfolio for work samples. The project cost mentioned here in the bid is not final, it may differ on the basis of design and would be finalized in the discussion. We can discuss more about the project on chat. Looking forward to hear to you regarding this opportunity. Warm Regards Himanshu
$155 USD në 3 ditë
4,8 (23 përshtypje)
4,7
4,7
Avatari i Përdoruesit
Hello Sir, I am Mechanical Engineer, I have great experience in this field and i can finish your chair project for low cost
$122 USD në 0 ditë
5,0 (6 përshtypje)
2,7
2,7
Avatari i Përdoruesit
A proposal has not yet been provided
$70 USD në 1 ditë
5,0 (1 review)
1,8
1,8
Avatari i Përdoruesit
Hello, I understand that you need some changes in your design which was originally created in Solidworks 2017. I am glad to tell you that I've pre-installed Solidworks 2017 and have more than 3 years of experience in Solidworks. You don't have to award me the project just yet. Just send me the files which needs to be worked on, in a private chat. I'll try to fix it in as much less time as possible and will get back to you. If you find my satisfactory, then you can award me the project. For samples of my work, check out my portfolio at https://www.freelancer.com/u/VKarmaa Regards
$30 USD në 1 ditë
4,9 (2 përshtypje)
1,8
1,8
Avatari i Përdoruesit
I own and am proficient with SW17
$250 USD në 1 ditë
0,0 (0 përshtypje)
0,0
0,0
Avatari i Përdoruesit
A proposal has not yet been provided
$222 USD në 3 ditë
0,0 (0 përshtypje)
0,0
0,0
Avatari i Përdoruesit
I am a mechanical engineer passout from NIT Kurukshetra who has worked in Hyundai, Mahindra and Continental R&Ds my specialization is converting any idea to 3D model or repair existing one to be 3D printed. I have 4+ experience in CAD,CAE and motion analysis and now own a 3D printing startup CADDMAN 3D at gurgaon, India I work with people from different industries using different softwares based on their requirement I wont promise things that I cant deliver on time. Dont delay much longer and share with me the existing files and the detail of the desired output 3D model along with tolerances. Lets start developing
$188 USD në 1 ditë
0,0 (0 përshtypje)
0,0
0,0
Avatari i Përdoruesit
I want my first project from you Relevant Skills and Experience I have already use solidworks in my past company for 5 year. for machine design and sheet metal developement
$150 USD në 4 ditë
0,0 (0 përshtypje)
0,0
0,0
Avatari i Përdoruesit
A proposal has not yet been provided
$55 USD në 7 ditë
0,0 (0 përshtypje)
0,0
0,0
Avatari i Përdoruesit
I have done many projects similar to this on Fiverr as a freelancer and i want to continue freelancing here on this platform. You can view my ratings and works on fiverr. I have completed more than 25 projects there on fiverr with overall rating of 4.8 star. I usually work on Solidworks, Catia and similar 3D design software.
$111 USD në 1 ditë
0,0 (0 përshtypje)
0,0
0,0

Rreth klientit

Flamuri i UNITED STATES
Decatur, United States
5,0
4
Mënyra e pagesës u verifikua
Anëtar që nga gush 17, 2017

Verifikimi i klientit

Faleminderit! Ne ju kemi dërguar me email një lidhje për të kërkuar kredinë tuaj falas.
Ndodhi një gabim gjatë dërgimit të email-it tuaj. Ju lutemi provoni përsëri.
Përdorues të regjistruar Punë të postuara
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Po ngarkohet shikimi paraprak
Leja u dha për Geolocation.
Seanca e hyrjes ka skaduar dhe ke dalë. Hyr sërish.