Find Jobs
Hire Freelancers

Convert Measurements from Metric to Imperial

$250-750 USD

I përfunduar
Postuar almost 5 years ago

$250-750 USD

Paguhet në dorëzim
Currently working on a sell sheet for a client and I have measurements that need to be converted from metric to imperial. Conversions must comply with the rules below. Word document with final conversions is fine, but each conversion must be accompany original measurements for reference. For Example Max Lifting Height = 28.5' (8.7m) Document is attached for reference. RULE A ) In case of RTL chart it is displayed in feet to the decimal point and pounds to 10 lb. increments. (maybe 5lb. increments with new design ML) So specifications brochure data related to RTL chart should be in feet to decimal, (NOT feet and inches). This makes a clean transfer and uniformity between switching between literature and the actual crane use, also common accepted practice in N.A. Any rounding off should be rounded down unless it is very-very -very close to rounding up number. Example: working radius is 12.5’, so print 12.5’ (not 12’6”). Example: Rated load is converted from kg and you arrive at 1,207 lb. Make sure you round down to 1,205 lb., do not round up to 1,210lb. This rule is based on the fact you never want to suggest or print something about the RTL chart that is not achievable or more amount than the actual ability of the crane. RULE B) In case of machine dimensions we think, use and write in feet and inches. So display in feet and inches. example: 12.5’ is written 12’6” for machine dimensions. Any rounding off should be rounded up unless it is very-very -very close to rounding down number. example: After converting from mm you get 12.58’, please use 12’7”. This rule is based on the fact that we never want to suggest or write the machine is smaller than it actually is. A customer cannot afford to get the machine to a job site and find out it will not fit into a location or door because the literature underestimated its size. For 9 years here now is the dimension “brakes” MUSA use for converting from feet in decimals to feet/inches. 1” = .083’ 2” =.166’ 3” =.25’ 4”=.33’ 5”= .42’ 6”=.50’ 7”=.58’ 8”=.66’ 9”=.75’ 10”=.83’ 11”=.91’ 12=.99’ example: 3,095 mm = 10.15’ so I round up 10.16’ , and print/use 10’ 2”
ID e Projektit: 19766364

Rreth projektit

10 propozime
Projekt në distancë
Aktive 5 yrs ago

Po kërkoni të fitoni para?

Përfitimet e ofertës për Freelancer

Vendosni buxhetin dhe afatin tuaj
Paguhuni për punën tuaj
Përshkruani propozimin tuaj
Është falas të regjistrohesh dhe të bësh oferta për punë
I dhënë për:
Avatari i Përdoruesit
Hello, my name is Ernesto. I am a mathematician; I worked as a university professor until 2014. Now, I specialize in preparing, editing, and converting documents and books in science, technology, engineering and mathematics for companies and individuals. If my skills and experience meet your standards, I would like to carry out an interview. Regarding the price of my bid, is only a placeholder, we can discuss and adjust the price accordingly to my duties. Kind regards, Ernesto.
$250 USD në 5 ditë
5,0 (55 përshtypje)
5,4
5,4
10 freelancers are bidding on average $362 USD for this job
Avatari i Përdoruesit
Hi there, I was invited to bid on your project by the project recruiter Bettina and I'd be glad to help you out with this task in converting your measurements in metrics system into imperial system following your guidelines. I've got almost 10 years of experience freelancing on freelancer.com and have worked on dozens of highly mathematical projects and gotten 5 star feedback for every one of them. I also maintain a 100% on-time and on-budget project completion record, so you can rest assured that I'd get the job done within the time and the budget I agreed to. (Please feel free to check my profile for more information). Thank you and I look forward to getting this job done for you!
$400 USD në 3 ditë
5,0 (11 përshtypje)
5,0
5,0
Avatari i Përdoruesit
OUR GOAL IS BRING TO LIFE YOUR IDEA. Performing Engineering Solutions to most variable disciplines, Creative Solutions and Product Design. Meeting and Solving different challenges, Owned all phases of the design process (from concept through prototype and production) and completed projects within budgetary, weight and cost constraints. Solving Challenges for Engineering Advancements trough CAD, GD&T and 2D/3D Design Expertise. Hello, thank you for your project and I have experience in metric units and imperial units, please contact me for more details if you feel interested, Thanks !
$500 USD në 4 ditë
5,0 (2 përshtypje)
3,7
3,7
Avatari i Përdoruesit
Hello, I am a PhD chemical engineer. Number conversion is a huge part of my life. I will get this done for your effectively, quickly, accurately and precisely. Let's get to work!
$333 USD në 2 ditë
5,0 (1 review)
1,6
1,6
Avatari i Përdoruesit
Dear, I'm mechanical engineer from Bosnia and Herzegovina with 13 years engineering experience. I have big experience in similar job. I can finish your project very fast and quality. Best regards.
$250 USD në 3 ditë
5,0 (1 review)
1,6
1,6
Avatari i Përdoruesit
Hello, my name is Lucia, I'm a junior level electrical engineer based in Canada. I think I would be a great candidate for your job. Having worked in manufacturing & project engineering at a plant that was located in Canada but owned by an American parent corporation, I am very familiar with the need to convert seamlessly between metric and imperial. I can create the imperial sell sheet for you, and also provide you with a conversion tool in the program of your choice (Excel sheet, java or python script, matlab, whatever is convenient) so you can review my methodology and use it in the future. Cheers, Lucia
$250 USD në 2 ditë
0,0 (0 përshtypje)
0,0
0,0
Avatari i Përdoruesit
I'm a very quick worker, familiar with technical constraints in general (I've done engineering design work, so I know just how important it is that things aren't too big), and eager to finish the job as soon as possible (while maintaining accuracy, of course). I check all my work meticulously, and will format the results in a way that makes it easy for you to paste them back into your specifications sheet. You say that rounding should almost always be in one direction (down for rated load, up for size, etc.). Should it *always* be in that direction? If not, is there a specific tolerance within which it might be in the other (10%, for instance), or should I just use best judgement?
$250 USD në 1 ditë
0,0 (0 përshtypje)
0,0
0,0
Avatari i Përdoruesit
Your project "Convert Measurements from Metric to Imperial/ is very clear, and simple. I've read your attached reference document, with your applying rules for conversion. I found myself able to achieve your requirement.
$555 USD në 10 ditë
0,0 (0 përshtypje)
0,0
0,0
Avatari i Përdoruesit
Hi I have read your description very carefully and i am an engineering students and i know how to convert the measurements. And your requirements for the conversions of Metric to Imperial will be get perfectly and accurate as you needed. Thanks
$333 USD në 3 ditë
0,0 (0 përshtypje)
0,0
0,0

Rreth klientit

Flamuri i UNITED STATES
Cedarburg, United States
4,9
33
Mënyra e pagesës u verifikua
Anëtar që nga sht 29, 2015

Verifikimi i klientit

Faleminderit! Ne ju kemi dërguar me email një lidhje për të kërkuar kredinë tuaj falas.
Ndodhi një gabim gjatë dërgimit të email-it tuaj. Ju lutemi provoni përsëri.
Përdorues të regjistruar Punë të postuara
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Po ngarkohet shikimi paraprak
Leja u dha për Geolocation.
Seanca e hyrjes ka skaduar dhe ke dalë. Hyr sërish.