Logo Freelancer How It Works Shfleto punët
Identifikohu Regjistrohu
Posto një projekt
Profile cover photo
Tani jeni duke ndjekur
Gabim duke ndjekur përdoruesin.
Ky përdorues nuk lejon përdoruesit për ta ndjekur atë.
Ju jeni ndjekës i këtij përdoruesi.
Plani juaj i anëtarësimit lejon vetëm 0 ndjekje. Përmirësoni planin këtu.
U anulua me sukses
Gabim duke çndjekur përdoruesin.
Ju e keni rekomanduar përdoruesin me sukses
Gabim në rekomandimin e përdoruesit.
Diçka shkoi keq. Rifresko faqen dhe provo sërish.
Emaili u verifikua me sukses.
Avatari i Përdoruesit
$8 USD / orë
Flamuri i VENEZUELA
maracaibo, venezuela
$8 USD / orë
Aktualisht është 8:28 m.d. këtu
U bashkua mars 4, 2017
1 Rekomandim

Nicolas M.

@nico2747

 5,0 (7 përshtypje)
3,5
3,5
85%
85%
$8 USD / orë
Flamuri i VENEZUELA
maracaibo, venezuela
$8 USD / orë
100%
Punët e Plotësuara
92%
Brenda Buxhetit
91%
Në Kohë
Asnjë
Shpeshtësia e Rimarrjes në Punë

Electrical Engineer

I am a Electrical Engineer graduated in Rafael Urdaneta University, Venezuela. I have experience in the design and deveplopment of Hardware and Software of electronic projects based in the Internet Of Things (IOT) using softwares for the design and simulation of the schematics of electronic circuits like proteus, Eagle and Altium, and design and implementation of electronic circuits in PCB using CopperCAM. I have experience in the programming of microcontrollers (PICs, Arduino, Raspberry and ESP8266) used for the hardware system, using programmers IDE like Arduino IDE, MPLAB X IDE and Python applying C Lenguage, C++, Python, Assembler and AVR. Additionally in the software part, I have experience in the design of the Graphic User Interface (GUI) applying UART,SPI and I2C protocols ,applying MODbus (Master-Slaves) using software like Visual Studio Code (HTML, CSS, javascript), MATLAB/Simulink (C), Visual Studio (Visual basic and C) and IDE programmers for LCD and TFT interfaces.
Freelancer Electrical Engineers Venezuela
Shikoni të gjitha Electrical Engineers në Venezuela

Kontaktoni Nicolas M. për punën tuaj

Identifikohu për të diskutuar çdo detaj gjatë bisedës.

Portfolio

4618513
The project consisted in send the data from the ESP32 that will read the information of the DHT22 temperature and humidity sensor, and then send it to the ESP8266 by UART. The ESP8266 will act first as a Acess Point, so the client can put the values of the SSID, SSID's password, broker and broker password, and submit the information to the ESP8266 and then this device will connect to the broker and send the infromation received by the ESP32 to the MQTT
MQTT and UART with ESP8266 and ESP32
The project consisted in send the data from the ESP32 that will read the information of the DHT22 temperature and humidity sensor, and then send it to the ESP8266 by UART. The ESP8266 will act first as a Acess Point, so the client can put the values of the SSID, SSID's password, broker and broker password, and submit the information to the ESP8266 and then this device will connect to the broker and send the infromation received by the ESP32 to the MQTT
MQTT and UART with ESP8266 and ESP32
The project consisted in send the data from the ESP32 that will read the information of the DHT22 temperature and humidity sensor, and then send it to the ESP8266 by UART. The ESP8266 will act first as a Acess Point, so the client can put the values of the SSID, SSID's password, broker and broker password, and submit the information to the ESP8266 and then this device will connect to the broker and send the infromation received by the ESP32 to the MQTT
MQTT and UART with ESP8266 and ESP32
The project consisted in send the data from the ESP32 that will read the information of the DHT22 temperature and humidity sensor, and then send it to the ESP8266 by UART. The ESP8266 will act first as a Acess Point, so the client can put the values of the SSID, SSID's password, broker and broker password, and submit the information to the ESP8266 and then this device will connect to the broker and send the infromation received by the ESP32 to the MQTT
MQTT and UART with ESP8266 and ESP32
The project consisted in send the data from the ESP32 that will read the information of the DHT22 temperature and humidity sensor, and then send it to the ESP8266 by UART. The ESP8266 will act first as a Acess Point, so the client can put the values of the SSID, SSID's password, broker and broker password, and submit the information to the ESP8266 and then this device will connect to the broker and send the infromation received by the ESP32 to the MQTT
MQTT and UART with ESP8266 and ESP32
The project consisted in send the data from the ESP32 that will read the information of the DHT22 temperature and humidity sensor, and then send it to the ESP8266 by UART. The ESP8266 will act first as a Acess Point, so the client can put the values of the SSID, SSID's password, broker and broker password, and submit the information to the ESP8266 and then this device will connect to the broker and send the infromation received by the ESP32 to the MQTT
MQTT and UART with ESP8266 and ESP32
The project consisted in send the data from the ESP32 that will read the information of the DHT22 temperature and humidity sensor, and then send it to the ESP8266 by UART. The ESP8266 will act first as a Acess Point, so the client can put the values of the SSID, SSID's password, broker and broker password, and submit the information to the ESP8266 and then this device will connect to the broker and send the infromation received by the ESP32 to the MQTT
MQTT and UART with ESP8266 and ESP32
The project consisted in send the data from the ESP32 that will read the information of the DHT22 temperature and humidity sensor, and then send it to the ESP8266 by UART. The ESP8266 will act first as a Acess Point, so the client can put the values of the SSID, SSID's password, broker and broker password, and submit the information to the ESP8266 and then this device will connect to the broker and send the infromation received by the ESP32 to the MQTT
MQTT and UART with ESP8266 and ESP32
The project consisted in send the data from the ESP32 that will read the information of the DHT22 temperature and humidity sensor, and then send it to the ESP8266 by UART. The ESP8266 will act first as a Acess Point, so the client can put the values of the SSID, SSID's password, broker and broker password, and submit the information to the ESP8266 and then this device will connect to the broker and send the infromation received by the ESP32 to the MQTT
MQTT and UART with ESP8266 and ESP32
The project consisted in send the data from the ESP32 that will read the information of the DHT22 temperature and humidity sensor, and then send it to the ESP8266 by UART. The ESP8266 will act first as a Acess Point, so the client can put the values of the SSID, SSID's password, broker and broker password, and submit the information to the ESP8266 and then this device will connect to the broker and send the infromation received by the ESP32 to the MQTT
MQTT and UART with ESP8266 and ESP32
The project consisted in send the data from the ESP32 that will read the information of the DHT22 temperature and humidity sensor, and then send it to the ESP8266 by UART. The ESP8266 will act first as a Acess Point, so the client can put the values of the SSID, SSID's password, broker and broker password, and submit the information to the ESP8266 and then this device will connect to the broker and send the infromation received by the ESP32 to the MQTT
MQTT and UART with ESP8266 and ESP32
The project consisted in send the data from the ESP32 that will read the information of the DHT22 temperature and humidity sensor, and then send it to the ESP8266 by UART. The ESP8266 will act first as a Acess Point, so the client can put the values of the SSID, SSID's password, broker and broker password, and submit the information to the ESP8266 and then this device will connect to the broker and send the infromation received by the ESP32 to the MQTT
MQTT and UART with ESP8266 and ESP32
4800819
The goal of this project was make and redesign the Smart Light System using Altium Designer 18 and developing: * Schematic * PCB Design * Gerber File * 3D Model * Bill of Materilas
Altium Project (Smart Light Redesign)
The goal of this project was make and redesign the Smart Light System using Altium Designer 18 and developing: * Schematic * PCB Design * Gerber File * 3D Model * Bill of Materilas
Altium Project (Smart Light Redesign)
The goal of this project was make and redesign the Smart Light System using Altium Designer 18 and developing: * Schematic * PCB Design * Gerber File * 3D Model * Bill of Materilas
Altium Project (Smart Light Redesign)
The goal of this project was make and redesign the Smart Light System using Altium Designer 18 and developing: * Schematic * PCB Design * Gerber File * 3D Model * Bill of Materilas
Altium Project (Smart Light Redesign)
The goal of this project was make and redesign the Smart Light System using Altium Designer 18 and developing: * Schematic * PCB Design * Gerber File * 3D Model * Bill of Materilas
Altium Project (Smart Light Redesign)
The goal of this project was make and redesign the Smart Light System using Altium Designer 18 and developing: * Schematic * PCB Design * Gerber File * 3D Model * Bill of Materilas
Altium Project (Smart Light Redesign)
4776113
Speed and turning sense control of a Stepper Motor NEMA 17
4618531
This project is based to send and receive data from the cayenne MQTT broker, through the ESP8266, by reading the information from a potentiometer and a MPU6050 with I2C protocol, and send the information form the ESP to the RASPBERRY PI using HTTP protocol, and save the data in txt file in the Rapsberry file.
CAYENNE MQTT communicattion with ESP8266 and Raspberry PI
This project is based to send and receive data from the cayenne MQTT broker, through the ESP8266, by reading the information from a potentiometer and a MPU6050 with I2C protocol, and send the information form the ESP to the RASPBERRY PI using HTTP protocol, and save the data in txt file in the Rapsberry file.
CAYENNE MQTT communicattion with ESP8266 and Raspberry PI
This project is based to send and receive data from the cayenne MQTT broker, through the ESP8266, by reading the information from a potentiometer and a MPU6050 with I2C protocol, and send the information form the ESP to the RASPBERRY PI using HTTP protocol, and save the data in txt file in the Rapsberry file.
CAYENNE MQTT communicattion with ESP8266 and Raspberry PI
This project is based to send and receive data from the cayenne MQTT broker, through the ESP8266, by reading the information from a potentiometer and a MPU6050 with I2C protocol, and send the information form the ESP to the RASPBERRY PI using HTTP protocol, and save the data in txt file in the Rapsberry file.
CAYENNE MQTT communicattion with ESP8266 and Raspberry PI
This project is based to send and receive data from the cayenne MQTT broker, through the ESP8266, by reading the information from a potentiometer and a MPU6050 with I2C protocol, and send the information form the ESP to the RASPBERRY PI using HTTP protocol, and save the data in txt file in the Rapsberry file.
CAYENNE MQTT communicattion with ESP8266 and Raspberry PI
This project is based to send and receive data from the cayenne MQTT broker, through the ESP8266, by reading the information from a potentiometer and a MPU6050 with I2C protocol, and send the information form the ESP to the RASPBERRY PI using HTTP protocol, and save the data in txt file in the Rapsberry file.
CAYENNE MQTT communicattion with ESP8266 and Raspberry PI
4499911
The RGB led bulb represents an abstract system designed with the idea of illuminated a room giving a striking aspect in the environment. The RGB led bulb bring to the user the changing of the color of the light, by an electronic configuration inside the bulb and a electronic interface made for control the light of the bulb For the design and simulation of the hardware were used Proteus, Arduino IDE was used to develop the software con conrol and monitoring, Visual Studio for the design of the websever (HTML, CSS, JavaScript), and Eagle for the design of final Schematic, BOM and PCB layout.
Smart RBG Led Bulb
4499909
The smart power plug represents an intelligence system used to bring safety at user in their homes or job residences by turning on or off the devices connected in their places using their smartphones or computers through WiFi connection and a single interface to see the status of the devices. For the design and simulation of the hardware were used Proteus, Arduino IDE was used to develop the software con conrol and monitoring, Visual Studio for the design of the websever (HTML, CSS, JavaScript), and Eagle for the design of final Schematic, BOM and PCB layout.
Smart Power Plug
4618513
The project consisted in send the data from the ESP32 that will read the information of the DHT22 temperature and humidity sensor, and then send it to the ESP8266 by UART. The ESP8266 will act first as a Acess Point, so the client can put the values of the SSID, SSID's password, broker and broker password, and submit the information to the ESP8266 and then this device will connect to the broker and send the infromation received by the ESP32 to the MQTT
MQTT and UART with ESP8266 and ESP32
The project consisted in send the data from the ESP32 that will read the information of the DHT22 temperature and humidity sensor, and then send it to the ESP8266 by UART. The ESP8266 will act first as a Acess Point, so the client can put the values of the SSID, SSID's password, broker and broker password, and submit the information to the ESP8266 and then this device will connect to the broker and send the infromation received by the ESP32 to the MQTT
MQTT and UART with ESP8266 and ESP32
The project consisted in send the data from the ESP32 that will read the information of the DHT22 temperature and humidity sensor, and then send it to the ESP8266 by UART. The ESP8266 will act first as a Acess Point, so the client can put the values of the SSID, SSID's password, broker and broker password, and submit the information to the ESP8266 and then this device will connect to the broker and send the infromation received by the ESP32 to the MQTT
MQTT and UART with ESP8266 and ESP32
The project consisted in send the data from the ESP32 that will read the information of the DHT22 temperature and humidity sensor, and then send it to the ESP8266 by UART. The ESP8266 will act first as a Acess Point, so the client can put the values of the SSID, SSID's password, broker and broker password, and submit the information to the ESP8266 and then this device will connect to the broker and send the infromation received by the ESP32 to the MQTT
MQTT and UART with ESP8266 and ESP32
The project consisted in send the data from the ESP32 that will read the information of the DHT22 temperature and humidity sensor, and then send it to the ESP8266 by UART. The ESP8266 will act first as a Acess Point, so the client can put the values of the SSID, SSID's password, broker and broker password, and submit the information to the ESP8266 and then this device will connect to the broker and send the infromation received by the ESP32 to the MQTT
MQTT and UART with ESP8266 and ESP32
The project consisted in send the data from the ESP32 that will read the information of the DHT22 temperature and humidity sensor, and then send it to the ESP8266 by UART. The ESP8266 will act first as a Acess Point, so the client can put the values of the SSID, SSID's password, broker and broker password, and submit the information to the ESP8266 and then this device will connect to the broker and send the infromation received by the ESP32 to the MQTT
MQTT and UART with ESP8266 and ESP32
The project consisted in send the data from the ESP32 that will read the information of the DHT22 temperature and humidity sensor, and then send it to the ESP8266 by UART. The ESP8266 will act first as a Acess Point, so the client can put the values of the SSID, SSID's password, broker and broker password, and submit the information to the ESP8266 and then this device will connect to the broker and send the infromation received by the ESP32 to the MQTT
MQTT and UART with ESP8266 and ESP32
The project consisted in send the data from the ESP32 that will read the information of the DHT22 temperature and humidity sensor, and then send it to the ESP8266 by UART. The ESP8266 will act first as a Acess Point, so the client can put the values of the SSID, SSID's password, broker and broker password, and submit the information to the ESP8266 and then this device will connect to the broker and send the infromation received by the ESP32 to the MQTT
MQTT and UART with ESP8266 and ESP32
The project consisted in send the data from the ESP32 that will read the information of the DHT22 temperature and humidity sensor, and then send it to the ESP8266 by UART. The ESP8266 will act first as a Acess Point, so the client can put the values of the SSID, SSID's password, broker and broker password, and submit the information to the ESP8266 and then this device will connect to the broker and send the infromation received by the ESP32 to the MQTT
MQTT and UART with ESP8266 and ESP32
The project consisted in send the data from the ESP32 that will read the information of the DHT22 temperature and humidity sensor, and then send it to the ESP8266 by UART. The ESP8266 will act first as a Acess Point, so the client can put the values of the SSID, SSID's password, broker and broker password, and submit the information to the ESP8266 and then this device will connect to the broker and send the infromation received by the ESP32 to the MQTT
MQTT and UART with ESP8266 and ESP32
The project consisted in send the data from the ESP32 that will read the information of the DHT22 temperature and humidity sensor, and then send it to the ESP8266 by UART. The ESP8266 will act first as a Acess Point, so the client can put the values of the SSID, SSID's password, broker and broker password, and submit the information to the ESP8266 and then this device will connect to the broker and send the infromation received by the ESP32 to the MQTT
MQTT and UART with ESP8266 and ESP32
The project consisted in send the data from the ESP32 that will read the information of the DHT22 temperature and humidity sensor, and then send it to the ESP8266 by UART. The ESP8266 will act first as a Acess Point, so the client can put the values of the SSID, SSID's password, broker and broker password, and submit the information to the ESP8266 and then this device will connect to the broker and send the infromation received by the ESP32 to the MQTT
MQTT and UART with ESP8266 and ESP32
4800819
The goal of this project was make and redesign the Smart Light System using Altium Designer 18 and developing: * Schematic * PCB Design * Gerber File * 3D Model * Bill of Materilas
Altium Project (Smart Light Redesign)
The goal of this project was make and redesign the Smart Light System using Altium Designer 18 and developing: * Schematic * PCB Design * Gerber File * 3D Model * Bill of Materilas
Altium Project (Smart Light Redesign)
The goal of this project was make and redesign the Smart Light System using Altium Designer 18 and developing: * Schematic * PCB Design * Gerber File * 3D Model * Bill of Materilas
Altium Project (Smart Light Redesign)
The goal of this project was make and redesign the Smart Light System using Altium Designer 18 and developing: * Schematic * PCB Design * Gerber File * 3D Model * Bill of Materilas
Altium Project (Smart Light Redesign)
The goal of this project was make and redesign the Smart Light System using Altium Designer 18 and developing: * Schematic * PCB Design * Gerber File * 3D Model * Bill of Materilas
Altium Project (Smart Light Redesign)
The goal of this project was make and redesign the Smart Light System using Altium Designer 18 and developing: * Schematic * PCB Design * Gerber File * 3D Model * Bill of Materilas
Altium Project (Smart Light Redesign)
4776113
Speed and turning sense control of a Stepper Motor NEMA 17
4618531
This project is based to send and receive data from the cayenne MQTT broker, through the ESP8266, by reading the information from a potentiometer and a MPU6050 with I2C protocol, and send the information form the ESP to the RASPBERRY PI using HTTP protocol, and save the data in txt file in the Rapsberry file.
CAYENNE MQTT communicattion with ESP8266 and Raspberry PI
This project is based to send and receive data from the cayenne MQTT broker, through the ESP8266, by reading the information from a potentiometer and a MPU6050 with I2C protocol, and send the information form the ESP to the RASPBERRY PI using HTTP protocol, and save the data in txt file in the Rapsberry file.
CAYENNE MQTT communicattion with ESP8266 and Raspberry PI
This project is based to send and receive data from the cayenne MQTT broker, through the ESP8266, by reading the information from a potentiometer and a MPU6050 with I2C protocol, and send the information form the ESP to the RASPBERRY PI using HTTP protocol, and save the data in txt file in the Rapsberry file.
CAYENNE MQTT communicattion with ESP8266 and Raspberry PI
This project is based to send and receive data from the cayenne MQTT broker, through the ESP8266, by reading the information from a potentiometer and a MPU6050 with I2C protocol, and send the information form the ESP to the RASPBERRY PI using HTTP protocol, and save the data in txt file in the Rapsberry file.
CAYENNE MQTT communicattion with ESP8266 and Raspberry PI
This project is based to send and receive data from the cayenne MQTT broker, through the ESP8266, by reading the information from a potentiometer and a MPU6050 with I2C protocol, and send the information form the ESP to the RASPBERRY PI using HTTP protocol, and save the data in txt file in the Rapsberry file.
CAYENNE MQTT communicattion with ESP8266 and Raspberry PI
This project is based to send and receive data from the cayenne MQTT broker, through the ESP8266, by reading the information from a potentiometer and a MPU6050 with I2C protocol, and send the information form the ESP to the RASPBERRY PI using HTTP protocol, and save the data in txt file in the Rapsberry file.
CAYENNE MQTT communicattion with ESP8266 and Raspberry PI
4499911
The RGB led bulb represents an abstract system designed with the idea of illuminated a room giving a striking aspect in the environment. The RGB led bulb bring to the user the changing of the color of the light, by an electronic configuration inside the bulb and a electronic interface made for control the light of the bulb For the design and simulation of the hardware were used Proteus, Arduino IDE was used to develop the software con conrol and monitoring, Visual Studio for the design of the websever (HTML, CSS, JavaScript), and Eagle for the design of final Schematic, BOM and PCB layout.
Smart RBG Led Bulb
4499909
The smart power plug represents an intelligence system used to bring safety at user in their homes or job residences by turning on or off the devices connected in their places using their smartphones or computers through WiFi connection and a single interface to see the status of the devices. For the design and simulation of the hardware were used Proteus, Arduino IDE was used to develop the software con conrol and monitoring, Visual Studio for the design of the websever (HTML, CSS, JavaScript), and Eagle for the design of final Schematic, BOM and PCB layout.
Smart Power Plug

Vlerësimet

Ndryshimet u ruajtën
Duke shfaqur 1 - 5 nga 7 përshtypje
Filtroni vlerësimet sipas:
5,0
€38,00 EUR
Development of 30KW Transducer for Ultrasonic Sealing System
HIGHLY RECOMMENDED.. I had posted the job more than 10 times and had assigned this to 2 freelancers before finding him. While others failed to provide any output, Nicolas was bang on target and provided the job in few days. He also reworked on the project to make the PCBA smaller. Very Genuine and reliable person. 100% Recommended.
Electronics
Microcontroller
Mechatronics
PCB Layout
Avatari i Përdoruesit
Flamuri i Nessen P.
@nessenpaul
•
6 years ago
5,0
£23,00 GBP
Do some data entry
Nicolas was very helpful and thorough with his work. It was very easy to communicate with him and he kept me updated with his progress. I would definitely recommend and use Nicolas again for future projects. Thanks Nicolas!
Excel
K
Flamuri i Keila E.
@keilaespinosa
•
6 years ago
5,0
$30,00 USD
GUI in MATLAB
Great man with great patience. definitely will hire again !
Engineering
Matlab and Mathematica
Algorithm
Software Architecture
Electrical Engineering
N
Closed User
@nissansf
•
6 years ago
5,0
£18,00 GBP
PLC Program Logic controllers
happt to use again
Electronics
Microcontroller
Electrical Engineering
Circuit Design
R
Closed User
@robert507
•
6 years ago
5,0
$40,00 USD
Prototype of Small Radio Frequency Converter
Good job, looking forward to work with you again in the future.
Electronics
Electrical Engineering
Avatari i Përdoruesit
Flamuri i Joseph T.
@chejetiu
•
6 years ago

Përvoja

Internships in the area of electricity and instrumentation PDVSA

PDVSA
gush 2016 - nën 2016 (3 months, 1 day)
Perform field and office work in the area of electricity and instrumentation, specifically working with load studies, design of electric planes, automation and process control plans, development of reports of electrical structures, maintenance of electrical works and systems .

Arsimi

Ingeniero electricista

Universidad Rafael Urdaneta, Venezuela 2013 - 2017
(4 years)

Kualifikimet

Diploma of instrumentation and industrial automation

Rafael Belloso Chacín University (URBE)
2017
Management of automation projects, industrial instrumentation, introduction and knowledge in programmable logic controllers (PLC), instrumented safety systems, telemetry and SCADA, PicoSoft and LOGO SIEMENS application, and maintenance and support management. Project: design of a system of filling of tanks applying programmable logic and SCADA.

MATLAB / Simulink course Advanced level

Rafael Urdaneta University (URU)
2015
Development of algorithms for the calculation of numerical methods (Gauss-Zeidel, Jacobi, Newton-Raphson, Regression of linear and non-linear systems), design of graphical interfaces in MATLAB, and data acquisition through the use of arduino in Matlab and Simulink Project: Implementation of a digital control system for a stabilized arm.

Basic level Solidworks course

College of Engineers of Zulia State (CIDEZ)
2016
Introduction to the program, design of basic mechanical parts (bolts, nuts, sprockets, gears, rollers, pistons, shock absorbers, screwdrivers and springs) and assembly of parts for construction of simple machines. Project: design of a servomotor for position regulation.

Botime

IMPLEMENTATION OF VARIABLE FRECUENCY DRIVE USING SVM ON A THREE PHASE INDUCTION ENGINE

Nicolas Moreno; Emilio Soto
This research was made with the objetive of implementing a discrete control system for an inverter using space vector modulation, in order to established a comparission of the techniques used for digital control of plants.

Kontaktoni Nicolas M. për punën tuaj

Identifikohu për të diskutuar çdo detaj gjatë bisedës.

Verifikimet

Punonjës i pavarur i preferuar
Identiteti i verifikuar
Pagesa e verifikuar
Numri i telefonit i verifikuar
Emaili i verifikuar
Lidhur me Facebook

Dёshmitё

us_eng_1.png US English 1 75%

Aftësitë më të mira

Electrical Engineering 5
Electronics 4
Matlab and Mathematica 4
Engineering 2
Algorithm 2

Kërko punonjës të pavarur të ngjashëm

Electrical Engineers in Venezuela
Electrical Engineers
Electronics Engineers
Matlab and Mathematica Engineers

Shfleto ekspozita të ngjashme

Electrical Engineering
Electronics
Matlab and Mathematica
Engineering
Përdoruesi i mëparshëm Pёrdoruesi Pasardhës
Ftesa u dërgua me sukses!
Faleminderit! Ne ju kemi dërguar me email një lidhje për të kërkuar kredinë tuaj falas.
Ndodhi një gabim gjatë dërgimit të email-it tuaj. Ju lutemi provoni përsëri.
Logo Freelancer Albania / Shqip Ndihma & Mbështetja Profesionist Freelancer KategoritëProjektetKonkurse FreelancerNdërmarrjeAnëtarësimProgrami i Preferuar i FreelancerMenaxhimi i ProjektitPunët LokalePhoto AnywhereVitrinëAPI për ZhvilluesitVerifikohuAplikacioni i Desktopit Rreth Rreth neshSi punonSiguriaInvestitorHarta e faqesTregimeLajmeEkipiÇmimetNjoftime për shtypKarriera Kushtet Politika e privatësisëTermat dhe KushtetPolitika e të drejtës së autoritKodi i SjelljesÇmimet dhe TarifatPartnerët Escrow.com LoadshiftWarrior Forum Aplikacione Logja e Apple App StoreLogo Google Play
Kopja te kujtesa e fragmenteve nuk u krye, provo sërish pasi të kesh përshtatur lejet.
U kopjua në tabelë
Përdorues të regjistruar Punë të postuara
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Po ngarkohet shikimi paraprak
Leja u dha për Geolocation.
Seanca e hyrjes ka skaduar dhe ke dalë. Hyr sërish.