VHDL for using Vivado for a basys3 artix-7 FPGA
$10-30 USD
Paguhet në dorëzim
Write code and program the Basys3 board to operate as described below.
I/O:
Use four switches to represent a 4-bit number. Use two more switches as "invert" and "reverse".
The output is to be shown on the seven segment display.
Operation:
The value of the 4-bit number is to be shown on the seven-segment
display. The value of the number is to be interpreted as follows.
If Invert is high then the bits are to be inverted. For example,
0110 would normally be shown as 6. But if the invert is high
then it should be seen as 1001 or 9.
If Reverse is high then the order of the bits is to be reversed.
For example, if the switches are 1100 it would normally be shown
as C. But if the reverse is high, then this number should be
read as 0011 and 3 be displayed instead.
If both Invert and Reverse are high do both operations.
Example:
Invert/Reverse Mode Example
0 - 0 Normal "0111" → 7
1 - 0 Inverted "0111" → 1000 or 8
0 - 1 Reversed "0111" → 1110 or E
1 - 1 Inverted & Reversed "0111" → 0001 or 1
Use with/select and when/else for the conditional statements.
ID Projekti: #31629283
Rreth projektit
10 profesionistë freelancer dërguan një ofertë mesatare prej $35 për këtë punë
FPGA VHDL VIVADO Expert Here I understand that you want to design FPGA VHDL VIVADO based project, yes I will design it for you just in 24 hours from now. I am expert in this field and having 3 years working experience Më shumë
Hi Sir, I have gone through your description in which you are looking for an expert having sound knowledge of FPGA having sound knowledge of VHDL for using Vivado for a basys3 artix-7 FPGA. I am highly interested to wo Më shumë
I have many experience on VHDL/Verilog and Basys3 board and I can finish the project quickly. We can talk the details via chat.
Hi Client, I have experince in Vlsi veriffication and design And I already worker on artix7 ,i am working on diffrent tools like Xilinx, Vivado, Modelsim,ect.... I am sure i will help you,if you want more discussio Më shumë
Hi there. i am electronic engineer, i have experience with xilinx board nexys 3, nexys 4ddr and basys 3. i can programing on VHDL and VERILOG. Now i am working with family artix -7 of xilinx. i can help you with your Më shumë