Ansys wind turbine cfd punët

I'm seeking an experienced engineer to implement finite element analysis using ansys software. The engineer will perform structural analysis on our steel tank reinforced with u channel on the circular joint under specific load conditions. Primary Responsibilities: - Execute a structural analysis on a steel tank - Consider both static load and hydrostatic pressure loads in the analysis - Use ansys software for the simulation Ideal Skillset: - Extensive experience with structural analysis and finite element methods - Proficiency in using ansys software - Strong understanding of different load concepts: static and hydrostatic pressure loads - Familiarity with steel as a material for structural analysis You should be able to interpret the results of the analysis a...

I'm looking for an experienced freelancer to assist in optical design and simulation using Ansys Lumerical software specifically aimed at communication hardware, more specifically, transmitters. Key Responsibilities: - Design effective and efficient optical layouts for transmitters. - Execute and analyze optical simulations. - Ensure that the optical design aligns with communication hardware requirements. Skills And Experience: - Proficient with Ansys Lumerical for Optical Design. - Comprehensive knowledge of communication hardware, especially transmitters. - Proven experience in optical design and simulation. - Must pay attention to detail and be result-oriented. I'm open to discussions if there are clarifications needed. Looking f...

I'm in need of an Ansys expert who can help me simulate a mechanical component and analyze it for stress. The simulation is to be conducted under dynamic load conditions. Key Responsibilities: - Understand the product design and its intended usage. - Create a dynamic loading situation within Ansys. - Conduct a thorough stress analysis of the mechanical component. - Provide a detailed report on the simulation results. You should have: - Proficiency in Ansys, particularly in stress analysis. - Experience in working with mechanical components. - Understanding of dynamic load simulations. - Ability to interpret and present simulation results. Your work will be instrumental in helping us ensure the reliability and safety of our product.

I'm in search of an experienced engineer with a deep ...and wheel rim design. The goal of this project is to conduct a topology optimization of an aluminum wheel alloy rim with a key focus on enhancing its performance metrics. This involves: - Designing for improved handling and grip - Reducing the weight of the wheel alloy rim - Enhancing the braking performance of the wheel The use of state-of-the-art simulation and optimization software such as ANSYS or HyperWorks would be beneficial. The project demands a thorough understanding of vehicle dynamics and wheel design, as well as a strong ability to consider and integrate different performance-enhancing factors. If you possess these rare skills and are able to succeed in this high performance task, then I look forward to he...

I am seeking a skilled professional to craft a comprehensive plan for a hybrid solar and wind energy system sufficient to power my entire home. Located in an area with a balanced mix of both wind and sun, I am confident that the right energy solution can be reached. The successful candidate for this project should possess: - Extensive knowledge in renewable energy, specifically wind and solar systems - Prior experience in designing home-scale energy systems - Familiarity with homes that lack an existing energy system - Creativity and innovative thinking in devising energy solutions. A detailed understanding of local weather patterns and the way they can affect energy production from solar and wind power would also be of great advantage. This project marks the...

I am in need of...tasks at hand include: - Optimizing current thickness of the underwater tank and chilled water pipes - Conducting a detailed analysis on the structure - Implementing bolt connections of plates, plate to plate and plate pipes Ideal candidates for this project should possess: - Proven experience in structural design, particularly in underwater bolted structures - Expertise in using STAAD PRO & Ansys SpaceClaim for detailed analysis - Ability to optimize design elements for cost-effectiveness without compromising safety - Experience with bolt connection design in similar projects As the project is already in the detailed design stage, the urgency of this job necessitates a quick turnaround while maintaining accuracy and precision. I look forward to reviewing y...

...incorporated with a coil. Here's precisely what I need: • Analyze heat transfer within the tank to maintain a low temperature between 0-100°C • Develop an effective solution in response to the details and dimensions provided • Produce a comprehensive report detailing findings, methodologies, and containing relevant diagrams Skills and Experience: • Proficiency in a FEA software package (e.g., ANSYS, Comsol, etc.) • Extensive experience in thermal modelling and heat transfer calculations • Sound knowledge of stainless 304 properties and characteristics • Engineer degree or above in a relevant field Your understanding of stainless 304's thermal properties, coupled with FEA expertise, makes this project a great match for experts i...

I need a professional with substantial ANSYS capabilities focusing on explicit dynamics. The primary task will be to assist with broaching simulations and result interpretations. Key Responsibilities: - Handling broaching simulations within ANSYS - Thorough analysis of simulation results - Provide comprehensive reports Skills & Experience: - Proficient in ANSYS explicit dynamics - Hands-on experience with broaching simulations - Strong analytical skills

3d, cad model, Ansys, designe, simulation

I am in need of a skilled video editor who can efficiently remove wind noise from my less-than-30-minute wedding footage. Consideration must be given whether to keep some level of background noise or completely eliminate it - your professional recommendation would be appreciated. Apart from the noise reduction, I also require color correction to enhance the overall video. Years of experience in similar projects and proficiency using video noise reduction and color grading tools will serve well for this project.

Urgently in need of a wind load calculation and a design from a Florida registered engineer for a bamboo and wood fence which is already built. Needed for code compliance in Pompano Beach, Florida. Thank you.

I am seeking an Ansys expert to assist me with a project that involves these key components: - Prism Modeling: I need a detailed model built of a prism using Ansys Software. The prism's shape is a cubic prism. - Magnetic Field Analysis: I require an in-depth analysis of the magnetic field. This will include stimulation to measure the magnetic field distribution within the prism. The ideal candidate for this project would have: Ansys maxwell knowledge background, modelling of prism with x,y,z axis, ansys stimulation knowledge, able to explain the work and able to teach with video recording. This project is important for me, and I need someone who can deliver accurate, detailed results. If you have the skills and experience, I would love to discuss this...

I'm looking for a CFD expert who can use Ansys Fluent to assess the liquid displacement in a cylindrical tank. The tank will undergo different phases including deceleration, pitching, and rolling. Key Requirements: - Utilize Ansys Fluent to model the fluid behavior inside the tank during deceleration, pitch, and roll - Generate a comprehensive report with numerical data and visualizations that clearly show the liquid displacement Ideal Skills for this Project: - Proficiency in CFD, specifically using Ansys Fluent - Experience in modeling and analyzing fluid behavior in various scenarios - Ability to generate detailed reports with numerical data and visualizations Please note that the results of this simulation will be used to assess the liquid di...

...in time series analysis, correlation and regression. Your task is to analyze a dataset and find correlations between various weather variables. The aim is to forecast future trends, identify patterns and relationships, and make predictions that are precise. Your responsibilities will include: - Analysing and making predictions about specific variables such as temperature, precipitation, and wind speed. - Applying time series analysis to establish forecasts for weather patterns. - Understanding and interpreting relationships between different weather variables using correlation and regression techniques. The ideal candidate should have significant experience with the R programming language and a strong understanding of statistics and forecasting models. Familiarity with weath...

I currently have a need for an experienced Mechanical Engineer. Without any specific project details, I am looking for someone with a wide ranging ta...creating technical drawings. You may be required to work on various types of systems and components, potentially including HVAC systems, robotics, or automotive components. Additionally, proficiency with tools and software is vital. The specifics may vary, but potential options include AutoCAD, SolidWorks, and ANSYS. Ideal skills and experience: - Broad knowledge in Mechanical Engineering tasks - Experience with diverse systems and components - Proficiency in AutoCAD, SolidWorks, ANSYS, or similar tools - Exceptional technical drawing ability If you are versatile and adaptable in the field of Mechanical Engineering, I enco...

...required. Only the pages of the book and the text inside the book need to be animated. Additionally, integration of pre-existing artwork into the pages of the book is required. Key elements: - Realistic animation style - Text and page-flipping animation - Integration of Pre-existing artwork on the pages of the book - Transition into and out of the animation from video footage - Specific imagery - 'wind flipping through the pages of a book' The ideal candidate will have experience with realistic animations and video footage to animation transitions. This animation has to captivate viewers with its realism and smooth transition in and out of the video. Experience or interest in music videos is a plus. Please share your portfolio or examples of similar work involving t...

Hello, I am looking...utilised at each time irrespective of which time period of year it is. It shall also have atleast 4 Bathrooms and two kitchens. You can include moroccan raid style, dome design, basement design, small pool, or making a hill style house in which there is soil on sides to save from direct sunlight. It is important to display wind direction through the year and also sunshine direction through a 3D design. I will just provide coordinates, you have to search an calculate correct wind and sun movements. There is enough land available, so you can design as you like, important is that we have a 23-25 degree temperature inside home in all times without using excessive electricity. So it shall be able to keep temperatures naturally. Please bid only if you...

I'm looking for an experienced ANSYS Workbench user to perform simulation of interference fit between two steel pipes and develop in a 2D or 3D model. Details of the project are: - You will receive detailed dimensions of the pipes prior to press fit. - The outcome should include visual representation of contact pressure, aiming to match the theoretical contact pressure value of 73 MPa. Ideal candidate should consider the following factors in the simulation: - Young's modulus - Poisson's ratio - Friction coefficient Skills and Experience Required: - Proficiency in ANSYS Workbench - Understanding of material properties and coefficients - Strong skills in mechanical engineering - High attention to detail Your task will be to ensure the simulation resul...

project edition for a 3D model.

...Dynamics (CFD) analysis for an underwater equipment design. The primary goal of the project is to improve equipment efficiency. The successful individual must therefore be proficient in CFD analysis, 3D modeling, and structural analysis and have knowledge of FOM, Sloshing etc. Your responsibilities will incorporate: - Analyzing the current design using CFD techniques - Identifying areas of improvement to enhance efficiency - Advising on appropriate design modifications A background in fluid dynamics coupled with an understanding of underwater equipment will be necessary for this task. Additionally, the potential to perceive potential issues before manufacturing will be a significant asset. Please ensure you've ample experience in the implementation of desig...

...require precise and accurate structural engineering calculations for my multi-story residential building. More specifically, I need these calculations for: - Foundations: Demonstrate a sound understanding of soil mechanics, bearing capacity, and foundational materials. Previous experience with foundation calculations for multi-story residential buildings is a plus. - Roof: Address loads such as wind, snow, and self-weight. A proficient understanding of the different types of roofing systems and their materials is expected. The freelancer should hold demonstrable experience working with multi-story residential buildings and have a firm understanding of structural engineering principles. A qualification in Civil or Structural Engineering would be highly desirable. Efficiency and...

I'm looking for a talented artist to create an engaging piece of digital artwork based on the god Boreas, renowned for his association with the strong northern wind. The style should be straightforward and placed on a white background. To qualify for this project, you should possess the following: - Proficiency in digital art - A knack for creating realistic yet simple art designs - Previous experience with mythological or deity-based artwork would be advantageous - Ability to meet deadlines without compromising on quality. Bring your own creativity and interpretation of Boreas into the task, presenting this ancient god in an artistic light. Let's create something special together.

I'm seeking an expert in computational fluid dynamics who can help me understand how air flows through our stationary louvres, with a focus on improving ventilation efficiency. The goal is to work out the amount of airflow through the Louvres at different wind speed Ideally, you will have: - Extensive experience with CFD - Understanding of aerodynamics, specifically related to ventilation systems - Prior work with stationary louvres - Ability to interpret simulation data and provide actionable insights for design modifications to enhance ventilation efficiency.

...for a certified engineer with CFD expertise. I need to simulate a fire scenario in one of the rooms of an 11+ story hotel. The focus will be on understanding how the fire spreads across the hotel and its impact on temperature, pressure, and heat flux in the rooms, hallways, and staircases. Key Requirements: - Conduct a CFD analysis focusing on the mentioned areas - Provide an overview of the fire spread - Analyze temperature distribution, pressure distribution, and heat flux - Prepare a detailed but basic CFD analysis report - Offer some insights into technical aspects of the findings Ideal Freelancer: - Holds a degree in engineering with a specialization in CFD - Has experience in simulating fire spread in large complex structures - Proficient in using ...

...thermal analysis and simulation to work on a project related to Li-ion batteries. I have already done some work. I don't know about battery modeling on ANSYS Fluent. I am trying to mimic TR using a thermal model. The geometry and the parameters are taken from the research paper (the research paper is attached). I propagated TR using a user-defined function (UDF) on ANSYS Fluent, but I couldn't get a higher cell temperature than the one mentioned in the paper. The UDF contains the data points and Time extrapolated from the research paper (Fig. 5). The heat generation is calculated using q''' = rho*Cp*dT/dt. (The work should be done on ANSYS Fluent). Key Tasks: - Conduct detailed thermal analysis and simulation on a Li-ion battery. - Show...

I have designed a model of a Kamps jet engine and I am now seeking an expert familiar with ANSYS software to simulate its operation. The primary fuels I am interested in are JetA and biodiesel. Understanding the performance of these fuels in relation to thrust, efficiency, fuel consumption, and emissions is of the utmost importance. This will be used for personal reasons. Ideal candidates for this project should have: - Proficient experience with ANSYS software - Understanding of jet engine operations - Knowledge of jet fuels (particularly JetA and biodiesel) The deliverable for this project will be a comprehensive report detailing the simulation results with comparison and analysis on the primary parameters: thrust, efficiency, fuel consumption, and emissions. Please note...

This project aims at optimizing the design of a steam turbine blade. The focus is on altering the blade's shape to potentially enhance the turbine's performance. An understanding of aerodynamics isn't mandatory, as specific aerodynamic considerations will be guided by a given 3D scan. Ideal freelancers for this job should have: - Proficiency in 3D modelling and design - Create 2D Drawing - Any prior experience working on turbine blades or similar projects will be an added advantage.

Create a First Task for 3 beams according discuss with us

I'm in need of a skilled freelancer to perform a mathematical calculation and 2D steady-state heat transfer simulation. The simulation will be conducted on a metal plate subject to convection boundary conditions. For this task, I would prefer the use of ANSYS software. Key Requirements: - Conduct a 2D steady-state heat transfer simulation - Work with a metal plate material - Apply convection as the boundary condition - Utilize ANSYS software for the simulation Ideal Skills: - Proficient in ANSYS software - Experience in conducting heat transfer simulations - Understanding of convection boundary conditions - Background in working with metal material properties in simulations.

I have a built model in spaceclaim and design modeler. Need to validate it based on the experiment carried out. The model includes geometric imperfections, resudual stress. I have tests done for 900mm, 1200m and 1500mm compression angles. Need to parameterise this model to achieve the same values for length as the experiment as well as go off scale. The results of the experiment include buckling of the angle iron when compressed by a certain value in the testing machine. The aim is to obtain the lateral displacement at the centre of the bar and the value of the critical force that corresponds to this. It is important that the model represents these results as closely as possible. The task is quite simple. And having completed it, there would be another task with a complex model that was a...

I'm searching for a skilled CFD engineer who is proficient in using ANSYS Fluent for conducting in-depth fluid flow analysis. The primary goal of this project is to perform a detailed analysis, providing comprehensive data and insights. Key responsibilities include: - Conducting CFD simulations using ANSYS Fluent - Ensuring the simulation captures all relevant fluid dynamics phenomena - Providing a comprehensive analysis report with detailed data The ideal candidate should have: - Proven experience in CFD simulations, specifically using ANSYS Fluent - Strong understanding of fluid dynamics and related concepts - Ability to generate detailed and comprehensive analysis reports - Strong attention to detail and an analytical mindset. If you mee...

I need a proficient ANSYS expert to assist in setting up a structural analysis simulation. Your role will primarily focus on: - Building a model within ANSYS that accurately represents a simple structure. - getting some solution and get the pdf

We are working under an expedited deadline (less than 1 month) to integrate machine learning with our unit commitment problem (UCP), specifically focusing on renewable energy sources (RES) - solar and wind energy. Key responsibilities: - Implement neural networks in the machine learning algorithm. - Expertly merge UCP with RES (both solar and wind energy). - Expert in unit commitment problems Ideal candidate: - Proven experience in machine learning - Familiarity with neural networks - Strong understanding of renewable energy systems - particularly solar and wind - Ability to meet tight deadlines Your expertise in neural networks and renewable energy is pivotal to the success of this project. Let's make the world more sustainable together!

I'm in need of a professional who can help me with reverse engineering for the blades and vanes of an industrial gas turbine. The project primarily aims at improving the performance of these parts. Expectations and Deliverables: - Creation of 3D models: The software of choice is STL. - Technological Paths: There's no specific requirement for casting, machining steps, and coating. Skills and Experience: - Proficiency in reverse engineering and 3D modeling. - Expertise in industrial gas turbines is a plus. - Experience with STL software. - Strong understanding of performance improvement strategies is preferred. Please note, a successful completion of this project could lead to further engagement. Your ability to meet the timeline and deliver top-notch work will be highl...

I'm looking for a skilled graphic designer who is experienced with Adobe Illustrator. The main purpose of the image is to educate readers on the development of a wind farm. Key Details: - The image should have a realistic illustrated style, showcasing the various stages of wind farm development in a visually appealing manner. - The image will include annotations and/or labels, however the detail will be quite minimal. The focus is on the illustration itself, with annotations serving as supplementary details. Ideal Skills & Experience: - Proficiency in Adobe Illustrator, with a strong portfolio showcasing previous illustrations. - Experience in educational graphics would be beneficial, but not required. - Ability to creatively depict complex processes in a clear an...

I'm in need of a skilled ANSYS Maxwell specialist to help with the simulation of an electric arc. Your task will involve: * Working on a basic model already made * Conducting the simulation The ideal candidate would have a deep understanding of electric arcs and hands-on experience with ANSYS Maxwell. We don't need to go into great depth, a basic model will suffice for this project. Let's create a straightforward but informative simulation!

I'm seeking a skilled professional who is well-versed with Ansys Fluent to conduct airflow analysis on a single-flue chimney. The purpose of the project is to comprehensively assess the airflow within the structure. While it is crucial to accurately determine the chimney's airflow behavior, a basic assessment without considering turbulence considerations will suffice for this project. Ideal candidates will have a strong background in fluid dynamics simulations and hands-on experience using Ansys Fluent. Proficiency in interpreting and summarizing complex airflow data will also be beneficial.

Ju lutemi Regjistrohuni ose Identifikohuni për të parë të dhënat.

I need an expert in PCB design to create a small magnetic levitation motor. My ideal designer w...working on similar miniaturized projects would be advantageous. Your ingenuity will be crucial in the success of this project. Let’s chat more about how you can help bring my vision to life. This magnetic levitation motor is used on a pump body. The size of the motor is about 15cm × 15cm, which can achieve levitation and rotation. . Smooth operation of the rotor is crucial. We plan to mount a turbine rotor on the motor rotor so that it can rotate and pump liquid, just like a pump. We plan to add multiple sensors to the rotor to detect its position and height. Also, we want to be able to control the starting and stopping of the motor via an external button. These are the go...

I am seeking a freelancer to undertake an analysis and design optimization of a truss structure, using ANSYS software and genetic algorithm. This is based on criteria provided in attached articles. Key deliverables include: - Optimization of material usage - Enhancement of load capacity - Management of stress distribution in the design The main objective of this project is to compare different analysis methods and their results. This is an urgent project requiring immediate commencement. Expertise in Structural Engineering, ANSYS, and algorithm optimization is essential. Preferred candidates would have proven experience in similar projects, particularly in comparing and evaluating analysis methodologies. A keen eye for detail and capability to draw meaningful conclusion...

I'm seeking an experienced engineer or designer who can develop a top-tier alloy rim for my sedan, with the primary goal of enhancing the vehicle's overall performance. Key Areas: - Durability and Strength: The rim should be able to withstand the pressures of regular road use, ensuring longevity and minimal maintenance. - Weight Reduction: A crucial aspect of the design is to minimize the weight of the rim, contributing to improved handling and maneuverability. - Heat Dissipation: Effective heat dissipation is another essential feature to be incorporated into the design, potentially leading to enhanced braking performance. The ideal candidate should have a strong background in mechanical engineering or product design, with a proven track record in alloy rim development. Previou...

I am looking for expert who can perform Ansys modal analysis for a small mechanical structure. This is to identify resonant frequencies and extract mode shapes.

I'm in need of an experienced electrical engineer to design a commercial electrical system. Key Requirements: - **System Design:** The primary task is to design the electrical system ...not mandatory. - **Renewable Energy:** While I didn't select specific requirements for renewable energy, knowledge in this area would be a bonus. Skills and Experience: - Proven experience in designing electrical systems, particularly for commercial properties. - In-depth knowledge of electrical engineering principles, codes, and standards. - Experience in renewable energy sources (solar power, wind energy) would be advantageous. Looking for someone who can deliver a comprehensive, efficient, and reliable electrical system design. Please share your relevant portfolio or past experien...

...automotive sector - Steel structures designing expertise Key Requirements: - Design sleeper berth with steel frame and light-weight cladding internally and externally - Accurate length, width, and height dimensions - Conformance with ADR 42 regulations - Creation of a bolt-on application design - Ease of access for occupant - Allowance for wiring and lighting etc - AERODYNAMIC design to avoid wind drag or excess fuel consumption with the following dimensions being a must. Internal Dimensions External Dimensions Length- 650mm (Min) Length- 680mm (Max) Width- 2350mm (Min) Width- 2480mm (Max) Height- 1800mm (Min) Height- 2100mm (Max) Maximum width of any vehicle in Australia is 2500mm Pedestrian doors are only permitted on ...

I am currently working on a project that involves designing a spar structure for an aerospace application. I require the expertise of a freelancer to perform a detailed stress analysis using ANSYS. Key Responsibilities: - Conduct a comprehensive stress analysis on the spar structure. - Ensure the analysis is geared towards aerospace standards and requirements. Ideal Skills & Experience: - Proficiency in ANSYS software, specifically in performing detailed stress analysis. - Prior experience in aerospace engineering, particularly in spar structure design. - Strong understanding of industry-specific requirements and standards.

I'm in need of an expert who can perform Ansys modal analysis for a small mechanical structure. This is to identify resonant frequencies and extract mode shapes. Key Responsibilities: - Conduct Ansys modal analysis for a small mechanical structure (alluminium plate) - Identify resonant frequencies and extract mode shapes - Ensure the structural stability of the analyzed system Ideal Skills and Experience: - Proficiency in Ansys software, particularly in conducting modal analysis - Strong background in mechanical engineering or related fields - Experience in identifying resonant frequencies and extracting mode shapes - Ability to ensure structural stability The freelancer should have a good understanding of how to approach the analysis to provide accurate resul...

I'm in need of a skilled structural engineer specializing in residential buildings, to calculate fastening requirements for 2 piece clay roofing tile based on /the information in the TRI manual, size of US Clay 2 piece tile. 130 mph wind speed class c requirements& local building code Key Requirements: - Expertise in residential structural engineering - Prior experience with roofing tile installations - Ability to asses fastening requirements/options based on the information in the TRI manual, size of US Clay 2 piece tile. 130 mph wind speed class c requirements& local building code. Please only apply if you have experience with similar projects and can provide evidence of successful completion.

I require a proficient Ansys Fluent user to conduct a study on the aerodynamic characteristics of the DrivAer model with the estate-back form: - Mesh independence study of baseline model, using Spaceclaim to prepare geometry and defeature it before meshing. Study must use symmetry to conduct the simulations over half of the body of the car in order to save time and computational costs. - Design of Experiment for a Roof Spoiler: Using three geometric parameters for the shape and position of the spoiler, which will each be tested at three different values (for a total of nine simulations), with the effects of adding the spoiler compared to the baseline model. - Design of Experiment for a Rear Diffuser: Similar to the above, but this time for the purpose of determining the design of a...

I'm looking for someone who can model 2 phase flow (humid air and ice) on a flat plate and is an expert in CFD. Since the plate is cold, there will be frost formation on it.

I'm in need of an experienced structural engineer to aid in the finalization of construction documentation for a house located on the G...documentation phase, so I need support for this particular phase. - The primary focus of the engineering support is on the load-bearing capacity of the structure. - The house's location necessitates that the design is able to support the region's specific conditions, including its wind loads. Ideal Skills and Experience: - Proficiency in structural engineering, particularly in residential projects. - Prior experience with construction documentation for buildings. - Expertise in load-bearing analysis, and ideally experience with wind load analysis. - Knowledge of regulations specific to the Gold Coast, Australia would be ben...