multiple temperature and pulse oximetry sensor

$15-25 AUD / hour

I përfunduar

Postuar

over 10 years ago

$15-25 AUD / hour

Hi, Let me start by saying that i have very little experience in the field of electronics. I am a Functional Neurologist. The idea for the device i need designed came from the need to see sensor values real time during a patients therapy. Using an arduino nano board i have made a prototype device for measuring temperature at 4 locations and sending that info via bluetooth to a computer. The idea is to get temperature and pulse oximetry readings displayed real time. These sensors would be placed at various points on the forehead. I need you to take it a step further and minimise the size of the device as much as possible so it can be housed in a headband (yet to be designed). I have no preferences with regards to sensors, my prototype uses the following thermistors; [login to view URL] with great success. I am open to suggestion if you believe another sensor would work better. I had planned on using the following pulse oximeter; [login to view URL] But again, open to suggestion. The device will need to take readings every second (or half second) from 4 thermistors (located along the forehead) and 2 pulse oximeters (at each temple). These temp/O2/pulse rate readings are then sent via bluetooth. I have the code required for the above to work. May need some tweeking for the new design. In summary, I need the above device designed and built and (once a final unit has been designed) more units will need to be made to sell to other professionals in my field. Ideally this will be an ongoing job. Regards, Eric Hansen

Arduino

Electrical Engineering

Electronics

Microcontroller

Product Design

ID e Projektit: 4909196

Rreth projektit

20 propozime

Projekt në distancë

Aktive 11 yrs ago

Po kërkoni të fitoni para?

Adresa e email-it

Përfitimet e ofertës për Freelancer

Vendosni buxhetin dhe afatin tuaj

Paguhuni për punën tuaj

Përshkruani propozimin tuaj

Është falas të regjistrohesh dhe të bësh oferta për punë

I dhënë për:

@verges2612

Hello drec, Im a mechatronics technician with a wide knowledge about Microcontrollers and sensors, i think your project it`s so interesting and i`d like to work on it, if you want to know more about me feel free to contact me.

$20 AUD në 8 ditë

0,0

(0 përshtypje)

0,0

20 profesionistët e pavarur ofrojnë mesatarisht $24 AUD/orë oferta për këtë punë

@jobykpaul

Hello, We can do this project. Please see my PM for more details

$31 AUD në 10 ditë

5,0

(35 përshtypje)

7,4

@MikroStar

hi, i am an electrical engineer and an embedded system designer.i have experience in designing wearable sensors and data logging to the PC and smart phones. i can suggest better sensors for the applications. i have capability to take ideas and implement it as a product. i would like to offer my services in improving the current design and transform it in a useful product. Looking forward for your reply.

$35 AUD në 20 ditë

4,8

(49 përshtypje)

6,6

@MIKY4227

Hi i can help you ,design more mdical instrument ECG ERG EEG Oximetros PH Glucose meters and other, see portfolio for samples of works

$21 AUD në 10 ditë

4,8

(20 përshtypje)

5,4

@ishtiak146

please check PM.. thanks

$20 AUD në 30 ditë

5,0

(10 përshtypje)

5,3

@bbk

I can make your project.I can make your project

$22 AUD në 10 ditë

5,0

(19 përshtypje)

5,2

@betaenergy

Dear Sir, I'm 15 year experienced Electronics Engineer whose working area is directly related to your project. I have designed several system which is related to your project. I have high level experience about hardware design, analog design, embedded system, microcontroller, power electronics, system simulation, digital motor control. Examples related to your project are attached. It shows my ability to make your project. If you investigate example, you will see that I have strong background similar to your projects. Project lists which I have made until now is attached also. We can determine budget by discussing details of your project. I’m open to work with amount which you can pay. Any questions, you can ask me. The way which will be used to implement is such as: - My profile is below. It shows every issues related to your project. Please evaluate it carefully. If you do it, you will see that I'm ideal candidate who can make your project without any problem. I will wait for being started contract. Regards. Metin Dear Sir, We are Reserach and Development company whose working area are : -Digital Motor Control -Analog Design -Electronic Design -Power Electronics -PCB design -Embedded system -Matlab -Simulation of hardware For each concept descriptions are as follows: Digital Motor Control: -3-phase induction motor vector control drive -Flux estimation algoritm generation -DSP(TMS320) implementation on motor drive -Low speed application -Torque and speed loop generation -Control algoritms Analog design -Low power distribution -Noissless special opamp based analog circuits -Analog filters -Orcad simulation of several circuits Electronic Design -RF transmitter and receiver -Bluetooh reader and transmitter -Magnetic reader Power Electronics -Implementation motor drive -AC/DC converter -DC-DC converter -Battery charger -Solar inverter -Renewable Energy simulations -Uninterruptle power supplies PCB design -Schematic design by Altium -PCB design by Altium -Power board design -SMPS board design Embedded system -PIC18,PIC24,PIC30 and dsPIC applications -Ardino -MSP430 -Atmel -DSP(Texas Instruments) -Renesas Matlab -Power Electronics simulation -Motor drive -Wind Energy -Solar Energy -Control applications Simulation of Hardware -Orcad Simulation(TI,National, Linear Tech, Maxim libraries) -LTI -National -Matlab Very important Note: References attached. Please look excel file to see projects which we made until now! Metin

$27 AUD në 3 ditë

4,7

(17 përshtypje)

4,9

@akramkarimi1036

Electrical Engineer (Gold-Medalist) from the oldest and the most reputable engineering institute of Pakistan (UET, Lahore). See my PM for my detailed experience in Electronics. Thanks

$25 AUD në 10 ditë

5,0

(6 përshtypje)

3,7

@HussamMehboob

Hi see my PM for detailed proposal.

$23 AUD në 8 ditë

4,5

(9 përshtypje)

3,8

@HQelectronic

Dear, I offer best quality with max PCB compression

$15 AUD në 10 ditë

5,0

(2 përshtypje)

3,2

@slavaten

Hi, I know well the subject. I have developed several medical devices. I work with Arduino, bluetooth, data visualization.

$16 AUD në 10 ditë

5,0

(2 përshtypje)

2,8

@riki888vw

Hi, I have experience with similar project. See PM please.

$22 AUD në 40 ditë

5,0

(1 review)

2,0

@ZiedanStein

Hello Sir, I am Embedded Systems Engineer and i am ready to do it for you please check your PM

$20 AUD në 6 ditë

5,0

(2 përshtypje)

1,7

@developerkln

i have good hand with frees witch stuffs so we can easily complete your project give a chance to proved it

$20 AUD në 20 ditë

0,0

(0 përshtypje)

0,0

@FandaR

Hello, please check PM

$42 AUD në 3 ditë

0,0

(0 përshtypje)

0,0

@fouadatmeh

I have good experience with Microcontroller Programming.

$15 AUD në 3 ditë

0,0

(0 përshtypje)

0,0

@glenzhang

I experience with EEG signal conditioning and amplifying, I can do this project in technical.

$27 AUD në 30 ditë

0,0

(0 përshtypje)

0,0

@JoseManuelMoreno

Hi, I have experience with sensors and developing systems getting and transmiting the information from sensors.

$22 AUD në 3 ditë

0,0

(0 përshtypje)

0,0

@panver

I have built some nice projects based on arduino as yours. I'll be glad to help you

$22 AUD në 3 ditë

0,0

(0 përshtypje)

0,0

@waltergallegos

I offer you 30 years in electronics, expertise and experience outsourcing design services since 1996. Please check private message.

$50 AUD në 10 ditë

0,0

(0 përshtypje)

0,0

@Milkor70

Hello, I am a Senior R&D engineer. In the past I have worked in the Bulgarian Academy of Science in the Bioelectrical engineering department. The projects, which me and my colleagues developed there are electro cardiogpraphs, holters and patient monitors. I have sizeable experience in Bluetooth embeded communication and RF ISM band 2,4 GHz communication devices. I understand what your idea is and if you wish we could start working on the project. By my opinion for you to sell that type of medical device you will need to certify it. Best Regards, Milko Rizanov

$20 AUD në 25 ditë